Abstract:Non-thermal plasma is promising for cracking the abundant but low-quality heavy oil into value-add chemicals due to its wide feedstock adaptability and high conversion rate. In this work, heavy oil cracking characteristics by microsecond pulsed spark discharge plasma were investigated in terms of pulse voltage, pulse repetition frequency and discharge power. Experiment results indicate pulse voltage and pulse repetition frequency are the main factors to control product yields and distribution. Pulse voltage determines single pulse energy and influences discharge stability and gas temperature. Pulse repetition frequency determines discharge intervals and affects collision reactions and quenching process. The maximum heavy oil conversion rate was 50.4% and the mass yields of H2 and C2H2 were 3.3% and 19.7% with 10.1 W discharge power, and H2 and C2H2 production energy consumption were 25.2 kW·h/m3H2 and 55.4 kW·h/m3C2H2. Compared with thermal plasma, heavy oil conversion rate of this work increased 12% with above 95% reduction in discharge power, and this work has a significant advantage in H2 and C2H2 production energy consumption. Carbon nanomaterials composed of carbon nanoflakes and nanoparticles can be obtained while producing H2 and C2H2. Especially, there were few-layers graphene nanoflakes (GNFs) in the carbon nanomaterials, which realized the full utilization of heavy oil. The possible reaction mechanism of heavy oil cracking was discussed using saturates-nucleating-aromatics-flaking theory. This work provides an effective COx-free method for one-step production of H2, C2H2 and carbon nanomaterials, which has wide application prospects for heavy oil utilization.

Oil conversion to syngas by rotating arc plasma

Utilization of Waste Rapeseed Oil by Rotating Gliding Arc Plasma

Hydropyrolysis of N-Hexane and Toluene to Acetylene in Rotating-Arc Plasma

Direct Conversion of Poor‐quality Residual Oil to Light Gases in Electricity‐driven Thermal Plasma Reactor

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Effect of Nitrogen/Oxygen Substances on the Pyrolysis of Alkane-Rich Gases to Acetylene by Thermal Plasma

Pyrolysis of Polyolefins Using Rotating Arc Plasma Technology for Production of Acetylene

Highly Efficient Treatment of Textile Dyeing Sludge by CO2 Thermal Plasma Gasification.

Conversion of Glycerol into Syngas by Rotating DC Arc Plasma

Synthesis of Syngas and Carbon Nanomaterials by Waste Rapeseed Oil Using Atmospheric Rotating Gliding Arc

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Conversion of the waste rapeseed oil by aerosol gliding arc discharge-assisted pyrolysis

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Experimental study on a small-scale oxygen-enriched entrained flow biomass gasifier assisted by non-thermal arc plasma

Carbon Dioxide and Methane Reforming Using DC Arc Plasma Reactor

Investigation of the Physical Properties in Rotating Gliding Arc Discharge with Rapeseed Oil

Co-pyrolysis of soybean soapstock with iron slag/aluminum scrap, and characterization and analysis of their products

Auxiliary Effect of CO2 on Pyrolysis of Oily Sludge.

Co-pyrolysis of saw dust and oily sludge with waste-heat utilization of steel slag on rotary kiln simulated engineering practice

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

One-step high-value conversion of heavy oil into H2, C2H2 and carbon nanomaterials by non-thermal plasma