Abstract:Iron-rich rolling sludge (FeRS) represents a kind of typical solid waste produced in the iron and steel industry, containing a certain amount of oil and large amounts of iron-dominant minerals. Pyrolysis under anaerobic environment can effectively eliminate organics at high temperatures without oxidation of Fe. This paper firstly investigated comprehensively the pyrolysis characteristics of FeRS. The degradation of organics in FeRS mainly occurred before 400 °C. The activation energy for pyrolysis of FeRS was extremely low, ca. 5.44 kJ/mol. The effects of pyrolytic temperature, atmosphere, heating rate, and stirring on pyrolysis characteristics were conducted. Commonly, the yield of solid residues maintained around 85 wt.%, with approximately 13 wt.% oil and 2 wt.% gas. Due to the low yield of oil and gas, their further utilization remains difficult despite CO2 introduction which could upgrade their quality. The solid residues after pyrolysis exhibited porous properties with co-existence of micropores and mesopores. Combined with the high content of zero-valent iron, magnetic property, hydrophobic characteristic, and low density, the solid residues could be further utilized for water pollution control and soil remediation. Moreover, the solid residues were suitable for sintering to recover valuable iron resources. However, the solid residues also contained certain heavy metals, such as Cd, Cr, Cu, Ni, Pb, and Zn, which might cause secondary pollution during their utilization. In particular, the toxic Cr possessed high content, which should be treated with detoxification and removal. This paper provides fundamental information for pyrolysis of FeRS and utilization of solid residues.

Co-pyrolysis of saw dust and oily sludge with waste-heat utilization of steel slag on rotary kiln simulated engineering practice

Characteristics, kinetics, infrared analysis and process optimization of co-pyrolysis of waste tires and oily sludge

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Process characteristics of catalytic thermochemical conversion of oily sludge with addition of steel slag towards energy and iron recovery

Investigation of Catalytic Co-Pyrolysis Characteristics and Synergistic Effect of Oily Sludge and Walnut Shell

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Co-pyrolysis of Oil Sludge with Hydrogen-Rich Plastics in a Vertical Stirring Reactor: Kinetic Analysis, Emissions, and Products

Co-pyrolysis of soybean soapstock with iron slag/aluminum scrap, and characterization and analysis of their products

Lab-scale Pyrolysis of Oil Sludge in Continuous Rotating Reactor:Mass/energy Balance and Product Analysis

Experimental investigtion of paper mill sludge pyrolysis in the laboratory-scale rotary kiln

Kinetic and thermodynamic analysis of pyrolysis of oily cold rolling mill sludge of steel industry under non-isothermal conditions

Thermogravimetric-infrared analysis and performance optimization of co-pyrolysis of oily sludge and rice husks

Modeling and simulation of coupled pyrolysis and gasification of oily sludge in a rotary kiln

Comparative Experiments on Recycling of Oil Sludge, Oil Shale and Biomass waste in a Continuous Rotating Pyrolysis Reactor

Pyrolysis Behaviors and Residue Properties of Iron-Rich Rolling Sludge from Steel Smelting

Auxiliary Effect of CO2 on Pyrolysis of Oily Sludge.

Co-pyrolysis re-use of sludge and biomass waste: Development, kinetics, synergistic mechanism and industrialization

Analysis of Pyrolysis Characteristics of Oily Sludge in Different Regions and Environmental Risk Assessment of Heavy Metals in Pyrolysis Residue.

Pyrolysis Performance and Kinetic Analysis of Oily Sludge

Enhancement of H 2 and light oil production and CO 2 emission mitigation during co-pyrolysis of oily sludge and incineration fly ash

Co-pyrolysis of sewage sludge and pinewood sawdust: the synergistic effect and bio-oil characteristics