Abstract:Oil sludge is one of the major industrial solid wastes from petroleum production and refining.Pyrolysis of oil sludge is one of most promising alternative to remove the VOCs(volatile organic compounds) and SVOCs(semivolatile organic compounds) from the solid waste and recover the energy in the gaseous and liquid products,with the minimum pollution to the environment.In this paper,oil sludge was pyrolyzed in a 1—2 kg·h~(-1) continuous tubular reactor with internal rotating paddles,which can be regarded as a simplified model of commercial rotary kiln pyrolyzer.The experiments were conducted at 550℃ in argon atmosphere,and mass balance and energy balance were obtained with error no more than 10% and 15%,respectively.About 70%(mass) of solid residue,20%(mass) of condensate,and 10%(mass) of non-condensable gas were produced.Methane,carbon dioxide,ethane and hydrogen were the major components in the low-calorific gas product(carrier gas Ar included)with calorific value around 11 MJ·m~(-3).Physico-chemical properties,distillation fractions,elemental contents,hydrocarbon composition were analyzed for the product oil.Diesel fraction was up to 75% and the calorific value was about 43 MJ·kg~(-1) and it could be used as fuel oil directly.However,due to the high contents of S,N,O and PAH,the quality of the fraction was not up to diesel specification.The majority of metal elements were fixed in the pyrolytic residues,while Pb,Cr and Ni were found to be enriched in the fly ash from hot filter.The solid residues contained much sand and inorganic ash.It could be reused as construction material.

Conversion of the waste rapeseed oil by aerosol gliding arc discharge-assisted pyrolysis

Utilization of Waste Rapeseed Oil by Rotating Gliding Arc Plasma

Oil conversion to syngas by rotating arc plasma

Synthesis of Syngas and Carbon Nanomaterials by Waste Rapeseed Oil Using Atmospheric Rotating Gliding Arc

Pyrolysis of Polyolefins Using Rotating Arc Plasma Technology for Production of Acetylene

Hydropyrolysis of N-Hexane and Toluene to Acetylene in Rotating-Arc Plasma

Gas Production from Polyethylene Terephthalate Using Rotating Arc Plasma

Study on Purification of Pyrolytic Oil Derived from Pilot-scale Pyrolysis of Waste Tires in Multilevel Reactor

Investigation of the Physical Properties in Rotating Gliding Arc Discharge with Rapeseed Oil

Direct Conversion of Poor‐quality Residual Oil to Light Gases in Electricity‐driven Thermal Plasma Reactor

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Production of waste rapeseed oil derived-carbon by aerosol chemical vapor deposition

Pyrolysis characteristics and product distribution of oil sludge based on radiant heating

Lab-scale Pyrolysis of Oil Sludge in Continuous Rotating Reactor:Mass/energy Balance and Product Analysis

Slow Pyrolysis of De-Oiled Rapeseed Cake: Influence of Pyrolysis Parameters on the Yield and Characteristics of the Liquid Obtained

Thermodynamic Analysis of Asphaltene Pyrolysis in Thermal Plasma Reactor

Kinetic and thermodynamic analysis of pyrolysis of oily cold rolling mill sludge of steel industry under non-isothermal conditions

Comparative Experiments on Recycling of Oil Sludge, Oil Shale and Biomass waste in a Continuous Rotating Pyrolysis Reactor

Pyrolysis Behaviors of Oil Sludge Based on TG/FTIR and PY-GC/MS

RF-ICP Thermal Plasma for Thermoplastic Waste Pyrolysis Process with High Conversion Yield and Tar Elimination

Kinetic Analysis of Catalytic Slurry Oil Pyrolysis Using Thermogravimetric Analysis