Abstract:Efficient improvement of paper strength while optimized sizing technique remains challenging and fascinating since specialty paper are required to low-cost, high printing quality and environmental sustainability. Herein, a novel controlled reactivity polyester glycol-based cross-linker (TBPU) applied in paper surface sizing was exploited by simple two-steps polymerization and blending process. An end-blocked structure design strategy of containing densely distributed multiple soft segments and active hydrogen nucleophilic segments (Butanone oxime, MEKO as end closure units) in isocyanate dispersion was achieved to address the scarcity of mechanical properties and the inconvenient in surface-sizing progress. TBPU can block the –NCO groups in IPDI segments at 60°C, and –NCO groups can be deblocked at the temperature higher than 110°C, which endow TBPU with latent cross-linking property. Afterward, we took advantage of the structural feature of polyhydroxy compounds and the adhesion to cellulose via using polyvinyl alcohol (PVA) as a blending component to form TBPU/PVA emulsion. The organization of –NCO groups react with hydroxyl groups, carbamate groups cross-linked with hydrogen bonds, and crystallized PCL segments generates phase-separated hierarchical domains. Serving as high-reactivity paper-sizing fillers capable of cross-linking and disintegration under an external change of temperature, the hierarchical domains can strengthen the specialty papers and enhance their water resistance and ink adhesion. The influences of TBPU content, PVA content and –NCO/–OH molar ratio on the physicochemical properties of the resultant emulsions and sized paper have been investigated. As a result, the paper sized with TBPU-1.6/PVA emulsion exhibit a tensile index of ≈107.19 Nm/g, a tearing index of ≈11.79 m N • m2/g, a folding resistance of ≈4511 s, an optimum blending temperature of 70°C and exceptional cooperation ratio with PVA and TBPU (4.0wt%, 3.0wt%), which are 1.649 times, 1.966 times, and 2.652 times than those of untreated papers (65 Nm/g, 6 m N • m2/g, 1701 s). Furthermore, sizing liquid can be conveniently applied and recycled due to their excellent environmental friendliness and Biodegradability, this work provides a promising solution for optimizing surface sizing technology.

Formulation Engineering for SBS Flexographic Printing Plates

Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing

Upgrade SBS into vitrimers with excellent mechanical and physical properties

In Situ Crosslinking of Hyperbranched Polyglycerol in Casting Solutions and Its Effect on the Structure and Properties of Porous Pvdf Membranes

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Novel Waterborne UV-Curable Hyperbranched Polyurethane Acrylate/Silica with Good Printability and Rheological Properties Applicable to Flexographic Ink

Effect of reactive plasticizer and UV radiation on the properties of hot melt pressure sensitive adhesive

Study on Properties of Magenta Water-Based Flexo Ink Used on BOPP Film

Effects of Stamp Properties and Printing Pressure on Microcontact Printing Process

Synthesis and Properties of Oil Absorption Resins Filled with Polybutadiene

Mechanics of surface crosslinked poly(dimethyl siloxane) microstructure used for microcontact transfer printing: ARTICLE

Preparation and performance of silica/SBR masterbatches with high silica loading by latex compounding method

Fabrication of High-Viscosity Biodegradable Poly(Butylene Succinate) (pbs)/solid Epoxy (Se)/carboxyl-Ended Polyester (cp) Blends

Effect of Defoamer on the Performance of Plastic Water-Based Flexographic Ink

Study on photocrosslinking self-plasticized polyvinyl alcohol photosensitive film

A novel SBS compound via blending with PS-b-PMBL diblock copolymer for enhanced mechanical properties

Polyvinyl alcohol-waterborne blocked-based polyurethane composite surface sizing agents for enhancing mechanical performance of specialty paper

Agglomeration of the Poly(butadiene-Styrene) Latex Triggered by CO2 Bubbling and the Preparation of Poly(methyl Methacrylate-Butadiene-styrene) Core/shell Particles with a Wide Size Distribution

Fabrication and Application of High Quality Poly(Dimethylsiloxane) Stamps by Gamma Ray Irradiation

Efficient use of waste photopolymer plates in bitumen modification and an alternative styrene–butadiene–styrene modification method

Effect of the Blending Process and Filler Loading on the Mechanical Properties of Silica-Filled Sbr/Br Compounds