Abstract:Associating molecular structure and mechanical properties is important for silicone rubber design. Although silicone rubbers are widely used due to their odourless, non-toxic, and high- and low-temperature resistance advantages, their application and development are still limited by their poor mechanical properties. The mechanical properties of silicone rubbers can be regulated by designing the cross-link density and cross-linking structure, and altering the molar contents of vinyl in the side groups of methyl vinyl silicone rubber (MVQ) leads to different cross-linking structures and cross-linking densities in the vulcanized rubber. Therefore, this study investigated the differences in molecular parameters and molecular chain structures of unprocessed MVQ rubbers with different vinyl contents. The results showed that MVQ rubbers with high vinyl contents were branched polymers, better facilitating the cross-linking reaction than MVQ rubbers with low vinyl contents. In addition, silicone rubbers with different vinyl contents were co-cross-linked to introduce an inhomogeneous cross-linked network in the silicone rubber to improve its mechanical properties. The cross-linked network properties were analysed by the Flory-Rehner model and Mooney-Rivlin plots, and it was found that the long chains in the sparsely cross-linked domains of the network favoured high elongation at break and the short chains in the densely cross-linked domains contributed to high modulus, which could satisfy the functions of reinforcing and toughening the rubber materials at the same time. It was also found by analysing the filler network and aggregate morphology that the inhomogeneous cross-linked network led to an improvement in the dispersion of silica in the rubber and a significant improvement in the mechanical properties of silicone rubber.

Design and preparation of novel silicon rubber with homogeneous crosslinking network and its application in high-performance SR/EPDM blend

Preparation of Styrene–Butadiene Rubber Vitrimers with High Strength and Toughness Through Imine and Hydrogen Bonds

Polybutadiene Vitrimers with Tunable Epoxy Ratios: Preparation and Properties

Ethylene-Propylene-Methylene/Isoprene Rubber/SiO2 Nanocomposites with Enhanced Mechanical Performances and Deformation Recovery Ability by a Combination of Synchronously Vulcanizing and Nanoparticle Reinforcement

Effects of modified silica on the co‐vulcanization kinetics and mechanical performances of natural rubber/styrene–butadiene rubber blends

A Facile and Environmentally Friendly Approach to Fabricate Hybrid Crosslinked Nitrile Butadiene Rubber with Comprehensively Improved Mechanical Performances by Incorporating Sacrificial Ionic Bonds

Effect of Deep Eutectic Solvents on Vulcanization Kinetics and Strain-Softening Behavior of Natural Rubber/styrene-Butadiene Rubber

A New Approach to Rubber Reinforcement

A green cross-link strategy to rubber composites using water as a crosslinking agent

Improving performance of natural rubber composites through the novel silica modified by a crosslinking agent

Performance Enhancement of Silica Filled Natural Rubber Nanocomposites Using Organic Deep Eutectic Solvent

Preparation of boron-containg hybridized silicon rubber by in-situ polymerization of vinylphenyl-functionalized polyborosiloxane and liquid silicone rubber

Effects of Dynamic Crosslinking on Crystallization, Structure and Mechanical Property of Ethylene-Octene Elastomer/EPDM Blends

Modulation of Mechanical Properties of Silica-Filled Silicone Rubber by Cross-Linked Network Structure

Co-vulcanization of natural rubber and Eucommia ulmoides gum for mediation of the nonlinear rheology behaviors

Efficient fabrication of flame-retarding silicone rubber/hydroxylated boron nitride nanocomposites based on volumetric extensional rheology

Highly stretchable, soft and sticky PDMS elastomer by solvothermal polymerization process

Inorganic and Organic Hybrid Nanoparticles as Multifunctional Crosslinkers for Rubber Vulcanization with High-Filler Rubber Interaction

Effect of 1‐ethylpyridinium bromide on enhancing the dispersion of silica and interfacial strength in rubber‐silica composite

Synthesis of high vinyl solution polymerized styrene-butadiene rubber with three-peak distribution using mixed coupling agents

Biomimetic Engineering Preparation of High Mechanical and Flame Retardant Elastomers by Introducing Sacrificial Bonds in Covalently Cross-Linked Chloroprene Rubber