Abstract:The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

Melt Grafting of Acrylic Acid onto ABS Resin and Its Application to Halogen-free Flame Retardant ABS Composites

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Modification of Acrylonitrile–butadiene–styrene Terpolymer by Grafting with Maleic Anhydride in the Melt. I. Preparation and Characterization

Chemically Initiated Graft Copolymerization of Methacrylic Acid Onto Acrylonitrile-Butadiene-Styrene Terpolymer

Modification of acrylonitrile-butadiene-styrene terpolymer by graft copolymerization with maleic anhydride in the melt. II. Properties and phase behavior

The Study of Melt Grafting Mechanism of Acrylic Acid and Butyl Acrylate Onto Low Density Polyethylene and Its Application As Internal Plasticizer

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

The Preparation of Mah/St Multi-Monomer Melt Grafting on Abs and Its Compatibilizer Effect on Pa6/Abs Blends

Development of Halogen‐Free Flame Retardant Acrylonitrile Butadiene Styrene (ABS) Based Composite Materials

Effect of Epoxy-Functionalization on the Halogen-Free Flame-Retardant Properties of Acrylonitrile-Butadiene-Styrene Resin

Modification of the Grafting Character to Prepare PA6/ABS-g-MA Blends with Higher Toughness and Stiffness

Grafting of long-chain unsaturated carboxylic acids onto acrylonitrile-butadiene-styrene terpolymer

Acrylonitrile–Butadiene–Styrene Terpolymer with Metal Hypophosphites: Flame Retardance and Mechanism Research

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

Solvothermal preparation of maleic anhydride grafted onto acrylonitrile–butadiene–styrene terpolymer (ABS)

Influence of the Tert‐dodecyl Mercaptan Content in Poly(acrylonitrile‐butadiene‐styrene) on Properties of Chlorinated Polyvinyl Chloride/poly(acrylonitrile‐butadiene‐styrene) Blends

Enhanced heat resistance of ABS/poly(N-(4-fluorophenyl) maleimide-alt-triallyl isocyanurate) composites based on solid-state interfacial reaction

Study on Microstructure of Inorganic Halogen-free Flame Retardant ABS Prepared by In-situ Reaction Compatibilization

Construction of Strong Non‐covalent Interactions for Preparation of Flame‐retarded Acrylic Pressure‐sensitive Adhesives with Improved Shear and Peel Strengths

Enhanced Mechanical, Thermal and Flame Retardant Properties by Combining Graphene Nanosheets and Metal Hydroxide Nanorods for Acrylonitrile–Butadiene–Styrene Copolymer Composite

Effect of Abs Grafting Degree and Compatibilization on the Properties of Pbt/Abs Blends