Abstract:Cleaner production of sugars and pulp from renewable feedstocks has captured significant scientific attention in the recent past because they can be used for various end applications. In the papermaking industry, a major fraction of hemicellulosic sugars is lost during the pulping. The present study aims at retrieving these hemicellulosic sugars through alkali-, hot-water-, and acid-mediated extraction prior to pulping, which otherwise would have been lost during pulping and washing of pulp. These retrieved sugars can be used as feedstocks for renewable energy and value-added products. Different pretreatments were applied, aided with varying temperature, chemical concentrations, and time. Substantial amounts of total reducing sugars (TRSs) up to 21.98, 13.2, and 15.01% were extracted prior to pulping by acid, alkali, and hot-water pretreatments. Compositions of mono sugars present in the treated liquor were also characterized and confirmed by high-performance liquid chromatography analysis. The morphological changes in the wheat straw after pre-extraction were studied using the field emission gun scanning electron microscopy technique. Pulping of untreated and pretreated wheat straw was carried out at different alkali charges (12, 14, and 16% NaOH). Among all, acid-pretreated straw showed an increase in pulp yield by 10.9% at a 16% alkali charge. Physical strength properties of different pulps were further examined. Alkali- and hot-water-pretreated straw pulp retained 94.26 and 83.16% tensile indices and 92.43 and 87.02% burst indices, respectively. An increase in tear index up to 4.32, 2.01, and 2.30% for alkali-, hot-water-, and acid-pretreated straw pulp was achieved, respectively. Hot-water- and alkali-pretreated wheat straw was observed to be conducive for paper production. The integrated use of wheat straw for extraction of underutilized sugars and pulp production in this way may serve as a key stepping stone for future biorefinery designs in pulp and paper mills.This article has not yet been cited by other publications.

Three Shrub Pulps Prepared by Hydrogen Peroxide- Alkaline Pulping

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

Meadow hay, Sida hermaphrodita (L.) Rusby and Silphium perfoliatum L. as potential non-wood raw materials for the pulp and paper industry

Research on Bast Fiber Extracted from the White Bark of Three Species in the Genus Broussonetia

Cellulose and lignin purified from Metroxylon sagu palm fronds by a new technology with 2-methylanthraquinone cooking and peroxymonosulfuric acid bleaching

Potential of acetosolv pulping as an environment-friendly pulping method for spruce, beech, miscanthus, and characterization of handsheets

Research on Milox Pulping of Non-Wood Raw Material

Potential of using Two Types of Reed for Pulp and Paper Industry

Balancing the effect of pretreatment severity on hemicellulose extraction and pulping performance during auto-hydrolysis prior to kraft pulping of acacia wood

Preparation of Pulp Refining Additive from Paper Sludge Through Organic Modification

Valorization of Wheat Straw for the Paper Industry: Pre-extraction of Reducing Sugars and Its Effect on Pulping and Papermaking Properties

On the Effect of Hot-Water Pretreatment in Sulfur-Free Pulping of Aspen and Wheat Straw

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content

Valorisation of wheat straw into paper with improved quality characteristics using ultrafiltered xylano-pectinolytic pulping approach

A comparison of kraft, PS, kraft-AQ and kraft-NaBH4 pulps of Brutia pine

Holocellulose fibers and paper from birch based on peracetic acid treatment

Delignification of Sugarcane Bagasse with Alkali and Peracetic Acid and Characterization of the Pulp

Optimization of kraft pulping process for Sesbania aculeata (dhaincha) stems using RSM