Abstract:Selective catalytic reduction (SCR) technology is currently the most effective deNOx technology and has broad application prospects. Moreover, there is a large NOx content in marine engine exhaust. However, the marine engine SCR catalyst will be affected by heavy metals, SO2, H2O(g), hydrocarbons (HC) and particulate matter (PM) in the exhaust, which will hinder the removal of NOx via SCR. Furthermore, due to the high loading operation of the marine engine and the regeneration of the diesel particulate filter (DPF), the exhaust temperature of the engine may exceed 600 °C, which leads to sintering of the SCR catalysts. Therefore, the development of new catalysts with good tolerances to the above emissions and process parameters is of great significance for further reducing NOx from marine engines. In this work, we first elaborate on the mechanism of the SCR catalyst poisoning caused by marine engine emissions, as well as the working mechanism of SCR catalysts affected by the engine exhaust temperature. Second, we also summarize the current technologies for improving the properties of SCR catalysts with the aim of enhancing the resistance and stability under complex working conditions. Finally, the challenges and perspectives associated with the performance optimization and technology popularization of marine SCR systems are discussed and proposed further. Consequently, this review may provide a valuable reference and inspiration for the development of catalysts and improvement in the denitration ability of SCR systems matched with marine engines.

Deactivation mechanism and regeneration of SCR denitration catalyst served in biomass power plant

Deactivation and Regeneration of Commercial SCR Catalysts Used in a 660 MW Coal-Fired Power Plant

Effects Of Promoters And Active Components On Performance Of Honeycomb Scr De-Nox Catalysts

Summary of deactivation mechanism for SCR denitration catalyst

Deactivation of commercial SCR catalyst used in 1000MW coal-fired power plant

Review of the Deactivation of Selective Catalytic Reduction DeNOx Catalysts

MECHANISM AND ANALYSIS OF SCR CATALYST DEACTIVATION

A Research on the Regeneration of Deactivated SCR Catalyst Used in Coal-Fired Plant

Research progress on the regeneration of SCR catalysts for flue gas denitrification

Method and apparatus for microwave-assisted regeneration of SCR denitration catalyst

Chemical Poison and Regeneration of SCR Catalysts for NO X Removal from Stationary Sources

An analysis of SCR reactor deactivation impact on NOx emissions from a compression ignition engine

Deactivation and Burning Regeneration of Coked Acid Catalysts in Catalytic Cracking Process of Biomass Tar

Study On The Deactivation And Activity Regeneration Of Catalyst In Biomass Tar Cracking

An overview of the deactivation mechanism and modification methods of the SCR catalysts for denitration from marine engine exhaust

Deactivation Mechanism of Multipoisons in Cement Furnace Flue Gas on Selective Catalytic Reduction Catalysts

A novel regeneration method for deactivated commercial NH3-SCR catalysts with promoted low-temperature activities

Poisoning mechanism and regeneration process of the denitration catalyst

RESEARCH STATUS OF LOW-TEMPERATURE DENITRIFYING CATALYSTS

In Situ Regeneration of Commercial NH3-SCR Catalysts with High-Temperature Water Vapor

Alkali-resistant Catalytic Reduction of NOx over CeO2-WO3/MCM-22 Supported Catalyst by Releasing Brønsted Acid Sites