Abstract:The work aims to study the preparation method of Flaky nano-MoS2 and its tribological applications in oil lubrication. Flaky nano-MoS2 was prepared by hydrothermal reaction at 220 °C with sodium molybdate and thiourea as raw materials. The chemical compositions, crystal structure and other physicochemical properties of the nano-sheets were characterized by FT-IR, XRD, HRTEM and EDS, respectively. After the surface was coated and modified by silane coupling agent (KH570), KH-MoS2 was dispersed into the paraffin oil through ultrasonic treatment to form the lubrication oil disperse system. Further, the ·130· 表面技术 2018 年 8 月 tribological properties of nano-sheets in the composite lubrication oil as additives were tested on a ball-on-disk tribometer. The theoretical model was established according to the results of SEM, EDS, etc. And the tribological properties were investigated. The flaky nano-MoS2 with the sizes of 30~100 nm was prepared. The tribological performance of paraffin oil could be significantly improved after the surface-coated MoS2 was added. When the additive amount of MoS2 was 1.0 wt%, the coefficient of friction (COF) was 53.4% lower than that of pure paraffin oil and the diameter of the wear tracks was 41.1% less than that of pure paraffin oil. Besides, obvious furrows could be observed on the surface of the disk when pure paraffin oil was used as lubricant. The width of wear track with nano-oil as lubricant decreased by 43.9% to the maximum extent. KH-MoS2 can flow into the frictional contact interface along with the lubricant and form a deposited film on the contact region by being attached to the friction surface as the interface slides relatively to achieve excellent friction-reducing and wear-resisting effect.

Preparation of Oil-soluble ZnS Nanoparticles and Evaluation of Anti-wear Properties

Preparation of Organic Fluids Containing Cyanex 302-Modified ZnS Particles with High Loading Concentration and Their Tribological Properties

Preparation of Diisooctyl Phosphate‐Modified Ultra‐Small Zinc Oxide Nanoparticle and Investigation of Its Tribological Properties as Additive in Alkylnaphthalene

Preparation of nano-scale molybdenum disulfide by liquid phase precipitation method and its lubricating properties

Preparation,Characterization of Oil-soluble Copper Nanoparticles and the Tribological Property as Additive in SF15W/40 Lubricating Oil

High-efficiency Preparation of Oil-Dispersible MoS2 Nanosheets with Superior Anti-Wear Property in Ultralow Concentration

The Effect Of Agglomeration Reduction On The Tribological Behavior Of Ws2 And Mos2 Nanoparticle Additives In The Boundary Lubrication Regime

Preparation of Multifunctional Nano-Molybdenum Disulfide and Its Tribological Properties in Water-Based Cutting Fluids.

Preparation of Flaky Nano-MoS2 and Its Anti-friction and Anti-wear Performance in Oil

Facile Fabrication of Surfactant‐Modified ZnS Hollow Spheres at Room Temperature and Its Tribological Properties in Liquid Paraffin

Synthesis and Tribological Behavior of Surface Coated Cu Nanoparticles in Liquid Paraffin

Preparation of Dispersed System of Ag_2S Nanoparticles in Lubrication Oil

Preparation, characterization and tribological application of nickel nanopieces

Study of the Tribological Behaviors of S, P-containing Triazine Derivatives As Additives in Rapeseed Oil

Surfactant-assisted Preparation of Y2O3-stabilized ZrO2 Nanoparticles and Their Tribological Performance in Mineral and Commercial Lubricating Oils

Surface-functionalized nanoMOFs in oil for friction and wear reduction and antioxidation

Dispersion-tribological Property Relationship in Mineral Oils Containing 2D Layered Α-Zirconium Phosphate Nanoplatelets

Friction and wear behaviour of Sialon/ (Ca,Mg)-Sialon with lubrication by coated PbS nanoparticles as oil additives

The Synergistic Antiwear and Frictional Properties of Organic Molybdenum Compound with Zinc Dialkyldithiophosphate

Preparation of Fe_3O_4 Nanopieces and Its Tribological Property in Liquid Paraffin

Preparation and Tribological Behavior of Silica Nano-Additives with Good Applicability for Both Polar and Non-Polar Base Oils