Abstract:The heterogeneous nucleation process of polypropylene (PP)/high density polyethylene (HDPE)/thermoplastic elastomer (POE) composites was realized through blending modification, and characterization techniques, including scanning electron microscopy, differential scanning calorimetry, X-ray diffraction, and dynamic mechanical analysis, were used to analyze the pattern of the impact of modified dicyclohexyl-terephthalamide (TMB-5) on the mechanical properties and thermal stability of the PP/HDPE/POE composites. The results indicated that the modified TMB-5 was advantageous to the improvement of the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites. When the amount of added modified TMB-5 was 0.4%, the impact strength and tensile strength of the PP/HDPE/POE composites increased to 36.3 kJ/m 2 and 31.7 MPa, respectively, which were, respectively, 99.5% and 8.5% higher than those of the materials prepared when the amount of added modified TMB was 0.1%. The materials had higher storage modulus in room-temperature and high-temperature environments: 2,438.2 MPa (room temperature), 1,103.9 MPa (120°C), and 1,054.8 MPa (140°C). In addition, the capability of the PP/HDPE/POE composites to crystallize was improved continuously, and the crystallinity increased considerably. At the same time, the crystallization and melting temperatures increased, β-crystal formation was induced, and glass transition temperature increased, thus effectively improving the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites.

Study on the Rigidity and Heat Resistance of Polypropylene by Modified Talc and Sodium Phosphate

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Additive Effects of N,N,N′,N′ -Tetraalkyl Terephthalamide on Crystalline Morphology and Mechanical Properties of Polypropylene

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Crystallization, mechanical, and heat resistance performances of copolymer polypropylene modified by α nucleating agent

Influence of N,N,N′,N′-tetraalkyl terephthalamide on isothermal crystallization kinetics and morphology evolution of polypropylene

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Modification of Polypropylene with Composite Nucleating Agents Containing 2,2-Methylene-bis-(4, 6-di-t-butylphenylene) Phosphate/Attapulgite/Silica Nano-particles

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

Mechanical and thermal properties of polypropylene (PP) composites filled with modified shell waste

Simultaneously Improving The Toughness, Flexural Modulus And Thermal Performance Of Isotactic Polypropylene By Alpha-Beta Crystalline Transition And Inorganic Whisker Reinforcement

Morphology and properties of PP in-reactor alloys prepared with a MgCl2/TiCl4/diisobutyl phthalate/phosphate tris-methylphenyl ester catalyst system

Mechanical properties and thermal stability of high-temperature (cooking temperature)-resistant PP/HDPE/POE composites

The Structure and Physical Properties of Polypropylene and Thermoplastic Olefin Nanocomposites Containing Nanosilica

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Effect of nucleating agents on crystalline morphology and mechanical properties of polypropylene

Properties Optimization of Polypropylene/Montmorillonite Nanocomposite Drawn Fibers