Process simulation and optimization of heat-integrated pressure swing distillation system for pyridine-water separation

Yan-ping XIN,Ming ZHAO,Ming XIA,Chun-jian XU
DOI: https://doi.org/10.3969/j.issn.1005-9954.2014.05.001
2014-01-01
Chemical engineering
Abstract:A new method for pyridine-water separation was presented by using heat-integrated pressure swing distillation since the azeotropic compositions change significantly with pressure.Condenser-reboiler type heat integration was used between the condenser in high pressure distillation column and the reboiler in low pressure distillation column to save energy and operating costs.NRTL activity model was chosen as the property package in the simulation.Rigorous steady state simulations were implemented by means of commercial software Aspen Plus. To obtain the optimized configurations for this process,an optimization scheme combining partial economical optimization with global economical optimization was proposed.Sequential iterative optimization procedure was presented to facilitate the optimization.The optimal operating pressures for the two columns are 16 kPa and 1 200 kPa,respectively.The optimal total numbers of stages for low pressure distillation column and high pressure distillation column are 12 and 14,respectively.The fresh feed stream and recycle stream are fed into low pressure distillation column from stages 9 and 6.The feed location of high pressure distillation column is stage 8.The optimal mass reflux ratio of high pressure distillation column is 0.59.Compared with the corresponding traditional pressure swing distillation scheme,heat-integrated pressure swing distillation scheme is more energy-saving and economical,with energy decreased by 43.52% and total annual cost (TAC)decreased by 40.70%.
What problem does this paper attempt to address?