Abstract:Three-dimensional numerical simulation was conducted to investigate the flow field and heat transfer performance of the Cross-Wavy Primary Surface (CWPS) recuperators; for microturbines. Using high-effective compact recuperators to achieve high thermal efficiency is one of the key techniques in the development of microturbine in recent years. Recuperators need to have minimum volume and weight, high reliability and durability. Most important of all, they need to have high thermal-effectiveness and low pressure-losses so that the gas turbine system can achieve high thermal performances. These requirements have attracted some research efforts in designing and implementing low-cost and compact recuperators for gas turbine engines recently. One of the promising techniques to achieve this goal is the so-called primary surface channels with small hydraulic dimensions. In this paper, we conducted a three-dimensional numerical study of flow and heat transfer for the Cross-Wavy Primary Surface (CATS) channels with two different geometries. In the CWPS configurations the secondary flow is created by means of curved and interrupted surfaces, which may disturb the thermal boundary layers and thus improve the thermal performances of the channels. To facilitate comparison, we chose the identical hydraulic diameters for the above four CWPS channels. Since our experiments on real recuperators showed that the Reynolds number ranges from 150 to 500 under the operating conditions, we implemented all the simulations under laminar flow situations. By analyzing the correlations of Nusselt numbers and friction factors vs. Reynolds numbers of the four CWPS channels, we found that the CWPS channels have superior and comprehensive thermal performance with high compactness, i.e., high heat transfer area to volume ratio, indicating excellent commercialized application in the compact recuperators.

Heat-transfer and resistance performance of miniature recuperator

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Numerical and Experimental Study on Flow and Heat Transfer Performance of Some Compact Surface Recuperators

Numerical and Experimental Study on the Heat Transfer and Pressure Drop of Compact Cross-Corrugated Recuperators

Experimental Investigation on Heat Transfer and Pressure Drop in a Microtubine Recuperator with Cross-Wavy Primary Surface Channels

Numerical Simulation Of Gas Flow And Heat Transfer In Cross-Wavy Primary Surface Channel For Microtubine Recuperators

Numerical Study and Optimization of Thermoelectric-Hydraulic Performance of a Novel Thermoelectric Generator Integrated Recuperator

Dimensionless Analysis of Heat Transfer and Flow Resistance on Laminar Flow Recuperator

Comparison of heat transfer and pressure drop in different recuperator geometries with corrugated walls

Experimental Investigation of Thermal and Hydrodynamic Performances of a Partial Cross-Wavy Recuperator for Microturbine Applications

Investigations of heat transfer and friction characteristics of compact cross-corrugated recuperators

Numerical Modeling of Recuperative Cryogenic Matrix Heat Exchangers and the Experimental Validation

COMPARISON OF HEAT TRANSFER SURFACES FOR MICROTURBINE RECUPERATORS

Dynamic Modeling for Compact Recuperator in Helium Gas Turbine Direct-Cycle System

Finite Element Analysis of Stress on Cross-Wavy Primary Surface Recuperator Based on Thermal-Structural Coupling Model

Numerical Analysis of Transient Response Characteristics of Primary Surface Recuperators

EXPERIMENTAL INVESTIGATION OF FLOW AND HEAT TRANSFER IN A PRIMARY SURFACE RECUPERATOR

Parametric Thermal Analysis of Intercooled and Recuperated Turbofan Engine

Influence of recuperater design parameter on micro has turbine performance

Numerical Study on Thermoelectric-Hydraulic Performance of Thermoelectric Recuperator with Wavy Thermoelectric Fins