Abstract:Three-dimensional numerical simulation was conducted to investigate the flow field and heat transfer performance of the Cross-Wavy Primary Surface (CWPS) recuperators; for microturbines. Using high-effective compact recuperators to achieve high thermal efficiency is one of the key techniques in the development of microturbine in recent years. Recuperators need to have minimum volume and weight, high reliability and durability. Most important of all, they need to have high thermal-effectiveness and low pressure-losses so that the gas turbine system can achieve high thermal performances. These requirements have attracted some research efforts in designing and implementing low-cost and compact recuperators for gas turbine engines recently. One of the promising techniques to achieve this goal is the so-called primary surface channels with small hydraulic dimensions. In this paper, we conducted a three-dimensional numerical study of flow and heat transfer for the Cross-Wavy Primary Surface (CATS) channels with two different geometries. In the CWPS configurations the secondary flow is created by means of curved and interrupted surfaces, which may disturb the thermal boundary layers and thus improve the thermal performances of the channels. To facilitate comparison, we chose the identical hydraulic diameters for the above four CWPS channels. Since our experiments on real recuperators showed that the Reynolds number ranges from 150 to 500 under the operating conditions, we implemented all the simulations under laminar flow situations. By analyzing the correlations of Nusselt numbers and friction factors vs. Reynolds numbers of the four CWPS channels, we found that the CWPS channels have superior and comprehensive thermal performance with high compactness, i.e., high heat transfer area to volume ratio, indicating excellent commercialized application in the compact recuperators.

Dimensionless Analysis of Heat Transfer and Flow Resistance on Laminar Flow Recuperator

Dimensionless Analysis of Pressure Drop and Heat Transfer on HTGR Coupled with Closed Brayton Cycle

Numerical Analysis of Heat Transfer Characteristics of a Falling Film Type Plate-Fin Condenser/Reboiler

Numerical and Experimental Study on the Heat Transfer and Pressure Drop of Compact Cross-Corrugated Recuperators

The application characteristics of plate-fin recuperator for HTGR

Evaluation , Comparison and Optimization of the Compact Recuperator for the High Temperature Gas-Cooled Reactor ( HTGR ) Helium Turbine System

A study on dynamic characteristics of plate-fin recuperator in high-temperature gas-cooled reactor closed cycle

Experimental Investigation on Heat Transfer and Pressure Drop in a Microtubine Recuperator with Cross-Wavy Primary Surface Channels

Dynamic Performances of Plate-Fin Recuperator with Infinite Core Heat Capacitance

Lumped Parameter Model for Dynamic Performances of Plate-Fin Recuperator

Comparison of heat transfer and pressure drop in different recuperator geometries with corrugated walls

Distributed Parameter Model of Plate-Fin Recuperator in High Temperature Gas-Cooled Reactor with Direct Helium Turbine Cycle

A Performance Recovery Coefficient for Thermal-Hydraulic Evaluation of Recuperator in Supercritical Carbon Dioxide Brayton Cycle

Numerical Analysis of Transient Response Characteristics of Primary Surface Recuperators

EXPERIMENTAL INVESTIGATION OF FLOW AND HEAT TRANSFER IN A PRIMARY SURFACE RECUPERATOR

Way of Ascerteining the Flow Resistance Coefficient and the Heat Transfer Enhancement Factor of Primary Surface Recuperators

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Numerical Simulation Of Gas Flow And Heat Transfer In Cross-Wavy Primary Surface Channel For Microtubine Recuperators

Heat-transfer and resistance performance of miniature recuperator

Dynamic Modeling for Compact Recuperator in Helium Gas Turbine Direct-Cycle System

Investigations of heat transfer and friction characteristics of compact cross-corrugated recuperators