Abstract:In the present study, the main results of thermodynamic analysis of the hybrid two-stage carbon dioxide (CO 2 ) transcritical mechanical compression–ejector cooling cycle using R245ca are provided. In the proposed cycle, an increase in the energy efficiency of a mechanical compression refrigeration machine (MCRM) is provided by additional supercooling of CO 2 after the gas cooler due to the use of cold obtained in an ejector cooling machine (ECM). The ECM uses part of the superheated vapor heat after the high-pressure compressor and the intermediate pressure heat after the low-pressure compressor. This solution provides intermediate cooling of CO 2 vapor without using an external cooling medium. The proposed method of computation makes it possible to determine the optimal parameters of the hybrid cooling cycle for the design conditions, ensuring the maximum possible MCRM efficiency. At the same time, the method considers the need to determine the optimal gas cooler pressure – a parameter that has a significant impact on efficiency growth. The effect of the intermediate pressure is extremely insignificant and is defined as the geometric mean value of the product of the gas cooler and evaporator pressures. The results show an increase in efficiency of the two-stage CO 2 MCRM by up to 31.6% at high temperatures of the environment. In addition, as a result of the exergy analysis, components have been identified, the improvement of which can lead to an additional increase in the efficiency of the entire system. As follows from the data obtained, the greatest attention should be paid to improving the ejector and reducing throttle losses in the CO 2 cycle.

Influence of Characteristics of CO2 Transcritical Cycle on the Heat Pump Drying System

Thermodynamic Analysis on a Two-Stage Transcritical CO2 Heat Pump Cycle with Double Ejectors

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

EXPERIMENTAL STUDY ON TWO TYPES OF TRANSCRITICAL CO2 HEAT PUMP WATER HEATER SYSTEM

Experimental study on three types of transcritical carbon dioxide heat pump water heater systems

Analysis of a Hybrid System of Liquid Desiccant and CO2 Transcritical Cycles

Experimental study on CO2 air source heat pump water heater

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Thermoeconomic Analysis Of Optimization Potential For Co2 Vapor Compression Cycle: From Transcritical To Supercritical Operation For Waste Heat Recovery From The Steam Condenser

Comprehensive analysis and thermo-economic optimization of the dry cooling system for supercritical CO 2 power cycle

Effect of drying air supply temperature and internal heat exchanger on performance of a novel closed-loop transcritical CO 2 air source heat pump drying system

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Simulation and Experimental Study of CO2 Transcritical Heat Pump System with Thermoelectric Subcooling

Experimental study on the transcritical cycle performance of a closed-loop heat pump drying system based on R744/R290/R32 ternary refrigerant

Experiment on Performance of Transcritical CO_2 Heat Pump Water Heater System with Ejector

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

Transcritical carbon dioxide refrigeration and heat pump system

Experimental study on performance of the trans-critical CO 2 heat pump with flash tank vapor injection at variable revolution ratio conditions

Experimental investigation on thermal characteristics of transcritical CO2 heat pump unit combined with thermal energy storage for residential heating

Development And Validation Of Variable Frequency Transcritical Co2 Heat Pump Systems

Thermodynamic Analysis of Hybrid Two-Stage CO 2 Mechanical Compression–ejector Cooling Cycle