Abstract:Due to the increasing global demand for industrial gas, the development of large-scale cryogenic air separation systems has attracted considerable attention in recent years. Increasing the height of the adsorption bed in a vertical radial flow adsorber used in cryogenic air separation systems may efficiently increase the treatment capacity of the air in the adsorber. However, uniformity of the flow distribution of the air inside the adsorber would be deteriorated using the height-increasing method. In order to reduce the non-uniformity of the flow distribution caused by the excessive height of adsorption bed in a vertical radial flow adsorber, a novel parallel connection method is proposed in the present work. The experimental apparatus is designed and constructed; the Computational Fluid Dynamics (CFD) technique is used to develop a CFD-based model, which is used to analyze the flow distribution, the static pressure drop and the radial velocity in the newly designed adsorber. In addition, the geometric parameters of annular flow channels and the adsorption bed thickness of the upper unit in the parallel-connected vertical radial flow adsorber are optimized, so that the upper and lower adsorption units could be penetrated by air simultaneously. Comparisons are made between the height-increasing method and the parallel connection method with the same adsorber height. It is shown that using the parallel connection method could reduce the difference between the maximum and minimum radial static pressure drop by 86.2% and improve the uniformity by 80% compared with those of using the height-increasing method. The optimal thickness ratio of the upper and lower adsorption units is obtained as 0.966, in which case the upper and lower adsorption units could be penetrated by air simultaneously, so that the adsorbents in adsorption space could be used more efficiently.

Flowing Characteristics of Affinity Adsorption in Tapered Bed with Upflow Method

Variation of the Axial Dispersion along the Bed Height for Adsorbents with a Density Difference and a Log-Normal Size Distribution in an Expanded Bed

Modeling Axial Distributions of Adsorbent Particle Size and Local Voidage in Expanded Bed

Measurement and modeling of axial distribution of adsorbent particles in expanded bed: taking into account the particle density difference

Variation of the Local Effective Axial Dispersion Coefficient with Bed Height in Expanded Beds

NONUNIFORM HYDRODYNAMICS AND AXIAL DISPERSION BEHAVIORS IN EXPANDED BEDS

Predictive Modeling of Protein Adsorption along the Bed Height by Taking into Account the Axial Nonuniform Liquid Dispersion and Particle Classification in Expanded Beds

Evaluation and Characterization of Axial Distribution in Expanded Bed: II. Liquid Mixing and Local Effective Axial Dispersion

Analysis of flow distribution in a horizontal-type molecular sieve adsorber

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Comparative Analysis and Evaluation on Three Typical Adsorbents for Expanded Bed Adsorption

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Affinity Adsorption and Hydrodynamic Behavior in A Tapered-Bed of Upward Flow

A Computational Fluid Dynamics Study of Binary Adsorption Separation in Chromatography

Simulation of flow field in vertical radial flow adsorber with parallel connection device

Theoretical analysis of uniform flow distribution in vertical radial adsorption bed

Numerical Study of Gas-Liquid Flow in Dual-Contact-Flow Absorber with One-Dimensional Two-Way Coupled Model

Comparison of the Adsorption Characteristics of Expanded Bed Adsorbent with Conventional Chromatographic Adsorbent

Flow characteristics of radial flow adsorber and its structure parameters optimization

Investigation on a Vertical Radial Flow Adsorber Designed by a Novel Parallel Connection Method