Abstract:Three-phase packed distillation has been so far relatively poorly understood. Hence, a Substantial mass transfer model describing the (vapor-liquid-liquid) three-phase flow in packed column is proposed to explore the essence of three-phase distillation. The model enables, for the first time, rigorous computation of all the interphase transfer parameters oil the basis of a thorough consideration of the unique How behaviors (Such as film breakup, rivulet-flow, Surface variation, etc.) Caused by the second liquid. The derived theoretical mass transfer model has been incorporated into the three-phase nonequilibrium Simulation. Moreover, comprehensive experimental investigations have been carried Out using two laboratory-scale columns, and four different packings (Montz-Pak B1-350, Rombopak 9M, Raschig Super-Ring 0.3, and Sulzer Optiflow C.36) were considered. The derived experimental database, covering a wide range of load conditions, is used for flow pattern identification and model validation. For the Studied n-butanol/water/n-propanol system, it is revealed that the flow pattern of file second liquid (aqueous phase) could play a critical role in the system performance. When the second liquid flows below the first liquid film, it will enlarge the interfacial area and enhance the vapor-liquid mass transfer; when the second liquid flows above the first liquid film, it will reduce the interfacial area and degrade the mass transfer. This fundamental flow behavior may essentially result in the discrepancy existing in the highly variable separation efficiencies in three-phase packed columns.

Influence of Marangoni Effect on Mass Transfer in Packed Column Distillation

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

Studies on Gas-Liquid Mass Transfer Characteristics of Horizontal Vessel

Direct effect of solvent viscosity on the physical mass transfer for wavy film flow in a packed column

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Mass Transfer Coefficient for Two-Phase Countercurrent Flow in a Packed Column with a Novel Internal

Study on the effect of temperature on the gas–liquid mass transfer rate of volatile liquid

Experimental and numerical study of liquid–liquid interphase mass transfer in a pilot-scale extraction column

Numerical Simulations of the Effect of Liquid Viscosity on Gas-Liquid Mass Transfer of a Bubble Column with a CFD-PBM Coupled Model

Marangoni Effect on Hydrodynamics and Mass Transfer Behavior in an Internal Loop Airlift Reactor under Elevated Pressure

Numerical Study of Heat Transfer Characteristics in Bog Heat Exchanger

Effect of gas distributor on gas–liquid dispersion and mass transfer characteristics in stirred tank

Mass Transfer Coefficients for CO2 Absorption into Aqueous Ammonia Solution Using a Packed Column

Extending Mass Transfer Correlations For Packed Three-Phase Distillation Simulation: A Hierarchical Parameter Estimation Methodology

Characterization of Marangoni Effect in Non-Isothermal Falling Liquid Films of Binary Mixtures

Effect of Particles on Hydrodynamics and Mass Transfer in a Slurry Bubble Column: Correlation of Experimental Data

Mass transfer model for liquid liquid micromixing systems

Mass transfer performance of gas-liquid segmented flow in microchannels

Influence of liquid viscosity on mass transfer of structured packing in CO2 absorber