Abstract:The development of scalable Out of Autoclave (OoA) in situ thermoset curing methods are required to overcome important drawbacks related to the autoclave based processing methods typically used in industry. The incorporation of graphene, an electrothermal carbon nanomaterial with the ability to transform electric energy into heat through Joule heating, emerges as a promising route to replace the conventional processing methods. In this work the electrical behaviour of both uncured and oven cured GNPs/epoxy composites with loadings of up to 10 wt% were evaluated and electrical percolation thresholds were established for both. Above the critical loading found for oven cured materials (8.5 wt%) the electrically conducting networks of GNPs formed in the matrix showed the ability to act as integrated nanoheaters when an electric current was passed through them, successfully curing the composites by Joule heating. Composites prepared by this OoA curing method (as an alternative to the traditional oven based one) at 10 wt% loading of GNPs were also prepared and compared to the oven cured ones. They showed more compact composite structures, with less microvoids and a preferred orientation of the GNPs in the matrix relative to the oven cured material at identical loading, as revealed by electron microscopy and polarized Raman spectroscopy, respectively. This microstructure and anisotropy induced by the electrically induced (i.e. OoA) cure led to GNPs/epoxy composites with superior electrical and mechanical properties (revealed by tensile testing). The well distributed GNP nanoparticles acting as nanoheaters integrated in a thermosetting matrix, in combination with excellent mechanical and electrical performances achieved for the overall graphene/epoxy composites and the simplicity associated to the method, should open the door to novel industrial applications.

Composite curing via Joule heating of carbon nanotube film

In-situ Curing of Glass Fiber Reinforced Polymer Composites Via Resistive Heating of Carbon Nanotube Films

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Carbon nanotube film engineered fiber reinforced polymer composites

Consolidation of aerospace-grade high-temperature thermoplastic carbon fiber composites via Nano-engineered electrothermal heating

Effect of carbonation curing regime on electric heating performance of CNT/cement composites

Comparison by thermal analysis of Joule-cured versus oven-cured composites

Electrically conductive GNP/epoxy composites for out-of-autoclave thermoset curing through Joule heating

Effect of energy on rapid curing of carbon fiber reinforced composites

Tailored Out-of-Oven Energy Efficient Manufacturing of High-Performance Composites with Two-Stage Self-Regulating Heating via a Double Positive Temperature Coefficient Effect

Optimization of a high-pressure microwave curing process for T800/X850 carbon fiber-reinforced plastic

Carbon Welding by Ultrafast Joule Heating.

A unique method for curing composite materials by introducing vibration treatment into the hybrid heating process

STUDY OF CURING BEHAVIORS OF CARBON NANOTUBES/EPOXY COMPOSITES

Effect of carbon nanotubes on thermoset curing and mechanical properties of carbon fiber reinforced epoxy resin laminates fabricated by self‐resistance electric heating

Ohmic heating curing of electrically conductive carbon nanofiber/cement-based composites to avoid frost damage under severely low temperature

Microwave Curing of Carbon Fiber/Bismaleimide Composite Laminates: Material Characterization and Hot Pressing Pretreatment

Real time monitoring of the curing degree and the manufacturing process of fiber reinforced composites with a carbon nanotube buckypaper sensor

Effect of Microwave Curing Process on the Flexural Strength and Interlaminar Shear Strength of Carbon Fiber/bismaleimide Composites

Temperature Dependence of Electrical Resistance in Carbon Nanotube Composite Film during Curing Process

Carbon nanotube-induced localized laser heating toward simultaneously enhanced laydown efficiency and fracture toughness of in-situ consolidated glass fiber thermoplastic composites