Abstract:Objective Latent heat energy storage materials absorb and release the latent heat during phase change, which could provide a kind of efficient and clean energy storage method. Electrospun fibrous membranes have potential application prospects in various latent heat energy storage materials. However, challenges remain in the development of eco-friendly phase change materials（PCMs） with high thermal conductivity and no leakage. Hence, the study of efficient latent heat energy storage materials as green energy carrier has essential scientific significance and potential application prospects. Method Polycaprolactone（PCL） has been widely used as a medical biodegradable material and drug release system because of its good biodegradability and biocompatibility. However, few studies of the PCM composite based on PCL matrix were carried out. In order to explore polycaprolactone（PCL） as a kind of eco-friendly polymer in the application of phase change energy storage fibers, this paper proposes a new type of composite phase change fibers consisting of PCL as sheaths, polyethylene glycol（PEG） and hydroxylated multiwall carbon nanotubes（MWCNTs-OH） as cores by coaxial electrospinning.Results The obtained PCL/PEG/MWCNTs-OH phase change composite fibers have smooth surface and core-shell structure, and the introduction of MWCNTs-OH did not affect the core-sheath structure of the fiber（Fig.3）, and the thermal conductivity of the fiber is greatly improved. When the mass fraction of MWCNTs-OH reaches 4%, the thermal conductivity of PCL/PEG/C4 fiber membrane increases to 0.121 8 W/（m·K）（Fig.4）. Compared with PCL/PEG membrane without MWCNTs-OH, the thermal conductivity of PCL/PEG/C4 fiber membrane increases by 9.53%. Meanwhile, the thermal stability of PCL/PEG/MWCNTs-OH enhance remarkably because of the addition of MWCNTs-OH in the core layer. Moreover, the PCM composites display the desirable thermal reliability as well as the effective temperature regulation capacity. It is almost no change of latent heat for the PCL/PEG/C4 after 100 thermal cycles（Fig.7）. It is clear that PCL sample presents much faster temperatare rise and decrease rates than PCL/PEG/C4 PCM composite（Fig.8）. The thermal energy storage and release time of PCL/PEG/C4 are 33.3% and 48.8% longer than that of PCL, suggesting the existence of PEG in the PCM composite could realize the effective thermal energy regulation. Derived from the excellent mechanical properties of PCL and MWCNTs-OH, composite phase change fibrous membranes exhibit higher tensile strength and elongation at break, and the composite phase change fibrous membrane containing 4% MWCNTs-OH has a tensile strength of 7.43 MPa and elongation at break of 132.2%. Compared with PCL/PEG, the tensile strength and elongation at break of the composite phase change fibrous membranes with MWCNTs-OH are significantly improved, showing excellent mechanical properties that are conducive to its repeated use in practical applications.Conclusion In summary, a series of PCL/PEG/MWCNTs-OH composite phase change fibrous membranes have been prepared by coaxial electrospun in this research, exhibiting perfect thermal conductivity and thermal stability by virtue of the addition of MWCNTs-OH. Since the components of composite phase change fiber are physically mixed, the phase change characteristics of PEG remain unchanged, and the melting temperatures of composite phase change fibrous membranes have no obvious change, ranging between 38.85 ℃ and 39.35 ℃, slightly higher than the normal temperature of human body. Therefore, the composite phase change fibrous membranes are promising for the biomedical materials with temperature regulation. The proposed method provides a new avenue for degradable phase change fibrous membrane to simultaneously achieve robust mechanical properties and leakage-free.

Preparation and properties of polylactic acid coated phase change material composite fabric

Preparation and properties of composite functional phase change nano-fiber membrane

Adhesion and Protective Properties of Polyvinyl Alcohol Nanofibrous Composite Fabrics

Plasma Surface Treatment and Application of Polyvinyl Alcohol/Polylactic Acid Electrospun Fibrous Hemostatic Membrane

Timeliness of Cold Plasma Treatment on Surface Modification of Polylactic Acid Fibers

Structure and Properties of Pla/Tencel Fabric Composites

Research and Application of Phase Change Composite Nanofibers

Morphological, Mechanical and Thermal Properties of Poly(lactic acid) (PLA)/Cellulose Nanofibrils (CNF) Composites Nanofiber for Tissue Engineering

Fabrication and thermal properties of wet-spun thermo-regulating fibers with a novel comb-like phase change polymer core

Effects of binders on properties of composite fabrics with nanofibers

Preparation and Characterization of Electrospun Fibers Based on Poly(l-Lactic Acid)/cellulose Acetate

Morphology, thermal and mechanical properties of electrospun polyvinylidene/polyethylene glycol composite nanofibers as form-stabilized phase change materials

Preparation and properties of biodegradable directional water transport composite fabrics

Improvement of the interfacial adhesion between PBO fibers and PPESK matrices using plasma-induced coating

Preparation and properties of eco-friendly polycaprolactone-based composite phase change fibrous membranes

Preparation and characterization of solvent-free fluids reinforced and plasticized polylactic acid fibrous membrane

Properties and Mechanism of Antistatic Biodegradable Polylactic Acid/multi-Walled Carbon Nanotube Composites

Solvent-free Cellulose Nanocrystal Fluids for Simultaneous Enhancement of Mechanical Properties, Thermal Conductivity, Moisture Permeability and Antibacterial Properties of Polylactic Acid Fibrous Membrane

INTERFACIAL STUDIES OF CONTINUOUS FIBERS REINFORCED POLY(AROMATIC ETHERS) CONTAINING PHTHALAZINONE MOIETIES

Multilevel structural polylactic acid fabrics for flame retardancy, durability, and electromagnetic interference shielding

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance