Abstract:Isotactic polypropylene (iPP) fibers with hierarchically porous structure were successfully prepared by electrospinning at 200 °C combined with thermally induced phase separation (TIPS). Dioctyl phthalate (DOP) and dibutyl phthalate (DBP) are typical diluents for iPP in TIPS and are used as solvents for electrospinning. An ionic liquid was added to increase the solution conductivity, facilitate the electrospinning process, and maintain a stable cone-jet electrospinning mode. Theoretical calculation demonstrates that the jet cools rapidly, and phase separation takes place in the jet during its travelling path, as the system traverses across the phase diagram from the single phase region to the metastable region. For the iPP/DOP system, the surface morphology of fibers changes from aligned microvoids bridged by fibrils to a wrinkled structure with the addition of ionic liquid, as the ionic liquid inhibits iPP crystallization. The pore morphology can also be modulated by varying co-diluent composition. Open pores appear on the fiber surface and the cross-section varies from closed cellular pores to a bi-continuous structure with the increase of DBP content in the co-diluent, which clearly demonstrates the phase separation mechanism changes from solid–liquid to liquid–liquid phase separation. The as-spun porous fibers show more than a 100-fold increase in specific surface area compared with the non-porous ones. The main advantages of this method are the pore formation process has a precise mechanism and the pore morphology is well correlated with the phase diagram. Furthermore, it is readily extended to other polymers with TIPS. Highly porous poly(vinylidene fluoride) (PVDF) fibers can be easily prepared from PVDF/DBP solution with a 157-fold increase in specific surface area.

Preparation and Property of Anionic Polyester Fiber

Preparation of Self-cleaning Polyester Fabrics by Chemical Vapor Deposition of Methyltrichlorosilane/Dimethyldichlorosilane

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Development of Sheath-Core Oxygen Anionic Polyester Filament

Preparation of Conductive Polyester Fiber Compounded with Carbon Black

Preparation and properties of conductive polypyrrole polyester fabric

Preparation and Property of Carbon-Nanotubes/pet

Nanofibrous Mats of Rigid Polysaccharides Prepared by Coaxial Electrospinning

Preparation and fluorine enrichment behavior of fluorinated polyester

Preparation of Antistatic Polyester Fiber via Layer-by-Layer Self-Assembly

Characterization and Application to Fiber Reinforced Composite of Catechol/polyethyleneimine Modified Polyester Fabrics by Mussel-inspiration

Preparation of New Hydrophilic PET Fiber by Grafting with Acrylic Acid and Modification with Amino Groups for Improvement of Dyeing Ability

Synthesis, Characterization, Application of PET Waste Blended with Hybrid Fibers and Preparation of Fiber Derived Unsaturated Resin

Preparation of Core/Shell Electrically Conductive Fibers by Efficient Coating Carbon Nanotubes on Polyester

Fabrication of high performance polyimide fibers by dry-jet wet spinning technology

Preparation of a water-based carboxylated Poly(phthalazione ether nitrile) sizing agent for interfacial reinforcement of CF/PPESK composites

Preparation and Characterization of High Performance Polyarylate Fiber

Formation Of Bead-Free And Core-Shell Superfine Electrospinning Fibers Under The Assistance Of Another Polymer And An Interfacial Compatibilizer

Reuse polyester/cotton blend fabrics to prepare fiber reinforced composite: Fabrication, characterization, and interfacial properties evaluation

Polymer Fibers with Hierarchically Porous Structure: Combination of High Temperature Electrospinning and Thermally Induced Phase Separation

Preparation of strong adhesive waterborne coating on polyester fabric based on cation-π interaction and its application in oil/water separation