Abstract:This research examines screening of the factors affecting cotton-sized yarn gain strength, elongation, stretch, size pick-up, and yarn abrasion resistance. The factors considered in this research are sizing machine parameters like sizing machine speed, squeezing roller pressure, warp yarn tension of various sizing machine zones, warp yarn twist, and viscosity of the size paste. Taguchi design with Minitab software has been used to design and analyze the results of the experiments. The study revealed that viscosity, yarn twist, sizing machine speed, and wet tension affected sized yarn gain strength significantly. Viscosity has maximum contribution to gain strength (34.57%) compared to other factors and has a positive effect on the gain strength of the sized yarn. For stretch percentage and the loss elongation of sized yarn, the wet tension is the most significant factor with 50.30% and 52.13% contribution respectively. Moreover, for the size pick-up and yarn abrasion resistance of sized yarn, the speed of the sizing machine is the most effective parameter with 44.45% and 56.29% contribution, respectively. The screening experimental result revealed the most significant factor that must be further optimized using response surface methods of experimental design. 本研究筛选了影响棉浆纱增强、伸长率、拉伸度、上浆率和耐磨性的因素. 本研究考虑的因素是浆纱机参数,如浆纱机速度、挤压辊压力、各浆纱机区域的经纱张力、经纱捻度和浆糊的粘度. 使用田口设计的Minitab软件对实验结果进行了设计和分析. 研究表明,粘度、纱线捻度、浆纱机转速和湿张力对浆纱增强有显著影响. 与其他因素相比,粘度对增强的贡献最大(34.57%),并且对上浆纱的增强有积极影响. 对于浆纱的拉伸率和损耗伸长率,湿张力是最显著的因素,其贡献率分别为50.30%和52.13%. 此外,对于上浆纱的上浆性能和耐磨性,浆纱机的速度是最有效的参数,其贡献率分别为44.45%和56.29%. 筛选实验结果揭示了最重要的因素,必须使用实验设计的响应面方法进行进一步优化.

Optimization Design of Carding Process Speed for Machine Picked Cotton

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Design Research on Roller of New Fiber Carding Machine

The Optimization of the Key Components of the Spinning Machine Conveyor System Based on ISIGHT

Optimization of Batch Cooking Parameters Based on SVM and Genetic Algorithm

Tuning drafting zone parameters for polyester yarn within a ring spinning system: modeling and optimization

Research and Discussion of Comber Cylinder Carding Degree

Test and Research on Reducing Yarn Forming Neps

Design of Cotton Recovery Device and Operation Parameters Optimization

DEVELOPMENT OF THE FAR-INFRARED POLYESTER/BAMBOO FIBER/ACRYLIC BLENDED KNITTING YARNS

Mixed-Framework-Based Energy Optimization of Chemi-Mechanical Pulping

Optimization on key parameters of tobacco flexible winnowing machine

Optimization of the Production Process of Flash-Spinning UHMWPE Superfine Fiber by Response Surface Methodology

Quality Prediction and Abnormal Processing Parameter Identification in Polypropylene Fiber Melt Spinning Using Artificial Intelligence Machine Learning and Deep Learning Algorithms

Determination of Factors Affecting the Quality of Sized Cotton Yarn Using Screening Experimental Method

Test Analysis of Improving CV Value in Spinning Production

Carding Behavior and Bearing Capacity of a Newly Developed Cylinder Card-Clothing Compatible with Cotton and Terylene Fibers by Nb Alloying of AISI 1090 Steel

An Experiment on Drying,Cooking and Reeling Cocoons of Ultrafine Filament

Study of hooked fiber in cotton yarn based on tracer fiber method

Study on Carding Effect of HXFA299 Combing Machine by Changing Carding Degree

Relationship of carding degree of comber against the nep containing of combed product