Abstract:During the shield TBM tunnelling, the working status of the cutterhead is difficult to be determined because the pressured chamber is located behind the cutterhead. In this paper, a cutterhead working status monitoring system for shield TBM tunnelling was developed to monitor the working status of the cutterhead in real time. The system consists of data acquisition subsystem, control and data transmission subsystem, as well as data processing and display subsystem. The cutter wear, cutter rotation speed and cutterhead temperature can be monitored and transmitted to the system software through the central port by cable and wireless. The system software can simultaneously display the TBM operating parameters and cutterhead working status parameters, predict the cutter life and present early warning of abnormal working status. The system has been successfully applied in a shield tunnelling project. Based on the analysis of the monitoring data, it was found that the normal cutter wear mainly depended on the rock abrasiveness and cutter rotation distance. The difference in cutter wear rate in the different ground was more than 3 times. The relative sliding between the cutter and the tunnel face was widespread. The sliding distance in low-abrasive formations exceeded 1/3 of the cutter track length. Under the normal tunneling conditions, the cutterhead temperature was lower than 50°. The successful application shows that this system can work stably in long term under harsh work environment and provide guidance for shield TBM tunnelling.

The Optimization and Modification Technology of Shield Cutter Heads on Construction Site

CASE STUDY OF RELIEVING A SLURRY SHIELD?S CUTTER HEAD FROM BEING TRAPPED IN SILTY SAND LAYERS

Influences of Shield Advance Rate and Abnormal Machine Halt on Tunnelling-Induced Ground Surface Settlements

Determination of the Cutterhead Torque for EPB Shield Tunneling Machine

Hydraulic Systems on Tunnel Shields and Related Energy-saving Techniques

Study on Design Theory and Method of Geology Adaptability for Earth Pressure Balanced Shield Tunneling Machine

Design and Test of the Cutter-devices Hydraulic System of the Shield Tunneling Machine Based on System Recomposed Technology

Torque Calculation Model of Cutting Head in Shield Machine and Experimental Study

A New Calculation Model of Cutterhead Torque and Investigation of Its Influencing Factors

Mechanical structure and hydraulic system design of 1.2 m simulated shield machine

Earth Layer Recognition During the Shield Machine Digging and Control Strategy of the Cutter Head Speed

Identification and Optimization of Energy Consumption by Shield Tunnel Machines Using A Combined Mechanical and Regression Analysis

An experimental study on energy saving potential for cutterhead drive of shield Tunneling machine using variable-speed hydraulic system

RESEARCH ON SOIL DEFORMATION DURING SHIELD CONSTRUCTION PROCESS

Efficiency Comparative Study for Hydraulic Drive System of Cutter Head in Shield Tunneling Machine

Analysis of Mechanical Properties of Two Typical Kinds of Cutterheads of Shield Machine

Experimental Study on Partial Wear of TBM Disc Cutter

Energy Saving of Cutterhead Hydraulic Drive System of Shield Tunneling Machine

Research of EPB Shield Tunneling Parameter Relations and Their Influence on Stratum Displacement

Development and Application of Cutterhead Working Status Monitoring System for Shield TBM Tunnelling

Variable speed pump control system for driving cutter head of test shield tunneling machine