Three-dimensional stability analysis of a longitudinally inclined shallow tunnel face
LianHeng Zhao,DeJian Li,Liang Li,Feng Yang,Xiao Cheng,Wei Luo
DOI: https://doi.org/10.1016/j.compgeo.2017.01.015
IF: 5.218
2017-07-01
Computers and Geotechnics
Abstract:The tunnel inclination angle (δ) generally exists in urban and cross-river (sea) tunnels; hence, its effect should be considered in the stability analysis of a tunnel face. However, the influence of this tunnel inclination angle is rarely studied. In this paper, considering the effects of the tunnel inclination angle and the tunneling length (L), the optimal upper-bound solutions of the active and passive failure pressures were obtained using sequential quadratic programming (SQP) based on the upper-bound limit analysis. The effects of the dimensionless parameters on the pressures and failure modes were investigated. The results show that the tunnel inclination angle δ and the dimensionless parameter L/D (D is the section diameter of the tunnel) significantly affect active and passive stabilities. The difference in the results between δ=−10° and δ=10° is mostly greater than 10% and reaches 80% when the internal friction angle (φ) is large. When the value of δ is zero, L/D does not affect on the result. The maximum difference in the results between L/D=0 and L/D=5 are 92.5% (passive failure) and 36.3% (active failure). For the active failure mode, with increasing of φ, the curves, which have δ values of −10°, 0° and 10°, intersect at a particular point when φ reaches a specific value.
computer science, interdisciplinary applications,geosciences, multidisciplinary,engineering, geological