Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Sulfate Erosion Resistance of Rubberized Self-compacting Concrete

Mechanical Properties and Microstructure of Rubber Concrete under Coupling Action of Sulfate Attack and Dry–Wet Cycle

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Experimental Investigation on the Dynamic Compressive Behavior of Rubberized Concrete

Experimental and Analytical Study on the Mechanical Properties of Rubberized Self-Compacting Concrete

Study of Mechanical Properties of Rubberized Self-compacting Concrete Subjected to Freeze-thaw Cycle

Experimental Study and Failure Criterion Analysis on Combined Compression-Shear Performance of Rubber Concrete (RC) with Different Rubber Replacement Ratio

Experimental investigation on the impact resistance of rubber self-compacting concrete

Study on the Mechanical Properties and Microstructure of Fiber-Reinforced Concrete Subjected to Sulfate Erosion

Experimental Research on Abrasion Resistance and Predictive Model of High-Density Rubberized Concrete with High Strength

Experimental Study on Dynamic Modulus and Damping Ratio of Rubber-Sand Mixtures over a Wide Strain Range

Examination of the permeability of rubberized concrete with different water/cement ratios and their resistance against acid and sulfate attack

Experimental and numerical investigation on fracture characteristics of self-compacting concrete mixed with waste rubber particles

Evaluation of dynamic shear modulus and damping ratio of rubber-sand mixture based on cyclic simple shear tests

Experimental study of the deterioration mechanism of concrete under sulfate attack in wet-dry cycles

Mechanical and Durability Properties of Rubberized Sulfur Concrete Using Waste Tire Crumb Rubber

Compressive Behavior of Rubberized Concrete under High Strain Rates

Numerical Simulation of the Effect of Freeze-Thaw Cycles on the Axial Compression Strength of Rubber Concrete

Degradation Law and Service Life Prediction Model of Tunnel Lining Concrete Suffered Combined Effects of Sulfate Attack and Drying–Wetting Cycles

Study on the Deterioration of Concrete under Dry-Wet Cycle and Sulfate Attack

Experiment on MICP-solidified calcareous sand with different rubber particle contents and sizes