Abstract:There is growing concern for corrosion damage in reinforced concrete structures with several decades’ service. Pullout tests and beam tests were carried out to study the effect of reinforcement corrosion on the bond behavior and bending strength of reinforced concrete beams. The bond strength of plain bars and concrete initially increases with increasing corrosion, then declines. The turning point depends on the cracking of the concrete cover. The bond strength of deformed bars and concrete increases with corrosion up to a certain amount, but with progressive increase in corrosion, the bond strength decreases, and the cracking of the concrete cover seems to have no effect on the bond strength. On the basis of test data, the bond strength coefficient recommended here, which, together with the bond strength of uncorroded steel bars and concrete, can be used to easily calculate the bond strength of corroded steel bars and concrete. The bond strength coefficient proposed in this paper can be used to study the bond stress-slip relationship of corroded steel bars and concrete. The bending strength of corroded reinforced concrete beams declines with increasing reinforcement corrosion. Decreased bending strength of corroded RC beam is due to reduction in steel bar cross section, reduction of yield strength of steel bar, and reduction of bond capacity between steel bar and concrete.

Researching Progress of Pull-out Method Checking Concrete Strength

STUDY ON GLUING-PULLING METHOD FOR CONCRETE STRENGTH TEST

Experimental research on the strength of concrete mearsured by limpet

Experimental Research on Concrete Strength Prediction by Limpet Pull-off Test in China

Test study on bond behavior of corroded steel bars and concrete

Study of Pullout Bearing Capacity of Diving Dry-Vibrated Compacted and Anti-Pull Stone Column

Comparison on bond degradation of reinforced recycled and normal concrete

Analytical Solution and Experimental Verification of Pullout Force of Twisted Steel Fibers in Ultra-High Performance Concrete

Test and simulation on pull-out behavior of steel wire in concrete

Study of Bond Behavior between Concrete and Steel Bars Based on New Beam Specimens

Status and Progress of Non-Destructive Test Method in Concrete

Test Study on Bond Stress-Slip Relationship of Concrete and Steel Bar

Experimental study on fracture properties of self-compacting concrete

Pullout Response of Ultra-High-Performance Concrete with Twisted Steel Fibers

Bond Behaviour of Normal/Recycled Concrete and Corroded Steel Bars

Research on test technology of concrete lateral pressure

Optimization of field test method on durability of coastal concrete structure

Enhanced finite element analysis of shear connector pull-out based on cohesive zone model

Experimental study on the bonding performance of corroded reinforced concrete under the coupling action of load and environment

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

Effect of Corrosion on Bond Behavior and Bending Strength of Reinforced Concrete Beams