Abstract:This paper presents a finite-element analysis (FEA) of the stress concentration factors (SCFs) of stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. The developed finite-element (FE) models include material non-linearities and are validated against corresponding experimental results available in the literature. The validated FE models were used to conduct an extensive parametric study comprising 324 FE models. The critical geometric parameters of the parametric study include: brace width-to-chord diameter ratio (beta(1) = b(1)/d(0)), brace-to-chord thickness ratio (tau = t(1)/t(0)), chord diameter-to-thickness ratio (2 gamma(1) = d(0)/t(0)), brace diameter-to-chord width ratio (beta(2) = d(1)/b(0)), chord width-to thickness ratio (2 gamma(2) = b(0)/t(0)), eccentricity (e), gap distance (g) of K-joints with gap, and overlap ratio (O-v) of overlapped K-joints. The results of the parametric study show that the effect of beta on the SCF varies for different types of K-joints. For all hybrid tubular K-joints, the values of SCFs increases with an increase in 2 gamma value. For gapped K-joints, the values of SCFs increases with an increase in e value. An attempt was made to compare the numerical results against the SCFs calculated in accordance with International Committee for the Development and Study of Tubular Structures (CIDECT) (2001) for both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. This comparison reveals how the design equations available in CIDECT (2001) for pure circular and square tubular joints are not suitable for predicting the SCFs of both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. Therefore, improved design equations are proposed in this paper for predicting accurately the SCFs of stainless steel hybrid tubular K-joints with square braces and circular chord, as well as circular braces and square chord.

PARAMETERIZED MODELING AND ANALYSIS OF STRESS CONCENTRATION OF DIAMOND BIRD-BEAK SQUARE-HOLLOW-SECTION JOINTS

Parametric FE Modeling to Predict Hot Spot Stress Concentrations of Bird-Beak SHS Joints in Offshore Structures

Stress Concentration Factors of Bird-Beak SHS X-joints under Brace Axial Forces

Numerical Investigation on Stress Concentration Factors of Square Bird-Beak Shs T-Joints Subject to Axial Forces

Tests to Determine Stress Concentration Factors for Square Bird-Beak SHS Joints under Chord and Brace Axial Forces

Parametric assessment of stress concentration factors for end-to-end joints with rotated SHSs

Hot Spot Stress and Fatigue Behavior of Bird-Beak SHS X-joints Subjected to Brace In-Plane Bending

Stress concentrations and fatigue behavior of bird-beak SHS overlap K-joints subjected to brace in-plane force

Stress Concentration Factors of Brace In-Plane Loaded Bird-Beak SHS Gap K-joints

SCF of bird-beak SHS X-joints under asymmetrical brace axial forces

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Fatigue behavior of bird-beak SHS X-joints under cyclic brace axial forces

Stress Concentration Factors and Fatigue Behavior of Square Bird-Beak Shs T-Joints under Out-Of-Plane Bending

Numerical Investigation and Design Rules for Stress Concentration Factors of Stainless-Steel Hybrid Tubular Joints

Fatigue Performance of Bird-Beak SHS Gap K-Joints under Brace In-Plane Force

Finite-element Analysis and Design of Stainless-Steel CHS-to-SHS Hybrid Tubular Joints under Axial Compression

A Numerical Study and Proposed Design Rules for Stress Concentration Factors of Stainless Steel Hybrid Tubular K-joints

Behaviour of bird-beak square hollow section X-joints under in-plane bending

Experimental and numerical investigations on stress concentration factors of concrete filled steel tube X-joints

Empirical modeling of stress concentration factors using finite element analysis and artificial neural networks for the fatigue design of tubular KT‐joints under combined loading

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading