Abstract:Cracks will inevitably occur in concrete structures or members during the construction process and service life due to aging, environmental factors, external loads, etc. To improve the strength and stability of the cracked concrete structures, many methods have been proposed to repair the cracks. However, the monitoring of the repairing process and repair quality has not been fully studied. The previous studies have proved that the SSAs based on the electromechanical impedance (EMI) technique have outperformed the traditional SAs based on the EMI technique in structural health monitoring of civil structures, however, SSAs have not been applied to the monitoring of the concrete crack repair. In this work, the monitoring of the concrete crack repair using the SSAs based on the EMI technique was explored. A total of 8 valid concrete specimens were prepared, and cracks in the concrete specimens were simulated by manually cutting under laboratory conditions. According to the principle of grouting method, two repair agents including cement paste and cement mortar were used to repair the cracks. The impedance signals of 28 days were measured, and three quantitative indicators root mean square deviation (RMSD), mean absolute percentage deviation (MAPD), and correlation coefficient deviation (CCD) were used to evaluate the quality of the concrete repair effect. The results indicate that the SSAs show excellent sensitivity and stability over the traditional SAs. In addition, the normalization values of the quantitative indicators were analyzed to distinguish the types of repair agents. A mathematical expression of exponential function was also proposed by fitting the experimental data to quantitatively evaluate and predict the repair effect of concrete cracks.

THE DAMAGE MONITORING OF RC COLUMN UNDER DYNAMIC LOADING BY SMART AGGREGATE

Feasibility of SA–based Concrete Seismic Stress Monitoring for High-Strength Concrete

Damage Monitoring of the RC Frame Shaking Table Test and Comparison with FEM Results

SA-based Concrete Seismic Stress Monitoring: the Influence of Non-Uniform Stress Fields

Multi-scale Monitoring Method for Local Seismic Damage of Reinforced Concrete Structure Members

Smart Aggregates for Monitoring Stress in Structural Lightweight Concrete

Damage Detection of L-Shaped Concrete Filled Steel Tube (L-CFST) Columns under Cyclic Loading Using Embedded Piezoceramic Transducers

A Pzt-Based Smart Aggregate for Seismic Shear Stress Monitoring

SA-based Concrete Seismic Stress Monitoring: a Case Study for Normal Strength Concrete

Validation of Finite Element Model by Smart Aggregate-Based Stress Monitoring

Seismic shear stress measurement using PZT based smart aggregate

SA-based Concrete Seismic Stress Monitoring: the Effect of Maximum Aggregate Size

Real-Time Damage Monitoring of Double-Tube Concrete Column Under Axial Force

SA-based Concrete Seismic Stress Monitoring: the Influence of Stirrup Confinement and Concentric Compression

A Primary Study on the Performance of Piezoceramic Based Smart Aggregate under Various Compressive Stresses

Acoustic Emission Study on the Damage Evolution of a Corroded Reinforced Concrete Column under Axial Loads

Analytical Model for Concrete Jacketed RC Columns with Precorrosion and Postcorrosion Damages under Uniaxial Loading

Monitoring of crack repair in concrete using spherical smart aggregates based on electromechanical impedance (EMI) technique

Vehicle load monitoring for asphalt concrete pavement based on smart aggregates

AE Monitoring for Damage Assessment of RC Exterior Beam-column Subassemblages Subjected to Cyclic Loading

Smart Health Monitoring Of Recycled Aggregate Concrete In Bridge Applications