Feasibility study on flat shovel bulging technique with shear wave based on bending elements

Jian Cheng,Dan Zhang,Ziwen Liu

2018-01-01

Abstract:Because of the small disturbance to the soil,the simple test and to truly reflect the actual state of the soil,the flat shovel expansion technique has been widely used in engineering geotechnical survey and testing.In this paper,the idea to apply the side mounted bending element to fiat shovel expansion technique is put forward,and its feasibility is discussed.The shear wave velocities of the soil under different overburden pressure and water content are tested by constructing the side-mounted bending element testing system.It can be seen that the shear wave velocities of the soil samples are in accordance with the overburden pressure linear relationship,and the higher the sand content of soil is,the greater the shear wave velocity is.Under the same overburden pressure,the shear wave velocity of the sand increases firstly and then decreases with the increase of water content.When the water content is 6.8％,the shear wave velocity of the sand reaches the extreme value.The experimental results show that the side bulging technique based on the bending element is feasible,and the physical and mechanical parameters of the soils with different depth could be tested in situ.