Minimum ignition energy of micron PMMA

Li JIANG,Yong PAN,Jin GUAN,Yan-ting JIANG,Hao YU,Jun-cheng JIANG
DOI: https://doi.org/10.3969/j.issn.1009-0029.2017.07.001
2017-01-01
Fire Science and Technology
Abstract:MIE-D 1.2 minimum ignition energy instrument was ad-opted to examine the minimum ignition energy of micron-sized polymethylmethacrylate (PMMA) powders with particle sizes of 5, 10, 15μm.The experimental results of fine PMMA dust were com-pared with that of conventional PMMA dust to reveal the differ-ence and reasons between the minimum ignition energy and the cor-responding change rule.The experimental results showed that the minimum ignition energy of PMMA dust is respectively 3, 6, 32 mJ. The most sensitive concentration of the corresponding dusts is 750 g/m3. The optimum ignition time is respectively 90, 90, 60 ms, and the optimum initial pressure is respectively 0.8, 0.8, 0.9 MPa. When dust concentration, ignition delay and initial pressure are in the critical value,the minimum ignition energy decreases with the increase of the parameter value;when the critical value is reached, the minimum ignition energy increases with the increase of the parameter value.
What problem does this paper attempt to address?