Abstract:Purpose Reinforcement of reinforced concrete (RC) beams in-service have always been an important research field, anchoring steel plate in the bottom of the beams is a kind of common reinforcement methods. In actual engineering, the contribution of pavement layer to the bearing capacity of RC beams is often ignored, which underestimates the bearing capacity and stiffness of RC beams to a certain extent. The purpose of this paper is to study the effect of pavement layer on the RC beams before and after reinforcement. Design/methodology/approach First, static load experiments are carried out on three in-service RC hollow slab beams, meanwhile, nonlinear finite element models are built to study the bearing capacity of them. The nonlinear material and shear slip effect of studs are considered in the models. Second, the finite element models are verified, and the numerical simulation results are in good agreement with the experimental results. Last, the finite element models are adopted to carry out the research on the influence of different steel plate thicknesses on the flexural bearing capacity and ductility. Findings The experimental results showed that pavement layers increase the flexural capacity of hollow slab beams by 16.7%, and contribute to increasing stiffness. Ductility ratio of SPRCB3 and PRCB2 was 30% and 24% lower than that of RCB1, respectively. The results showed that when the steel plate thickness was 1 mm–6 mm, the bearing capacity of the hollow slab beam increased gradually from 2158.0 kN.m to 2656.6 kN.m. As the steel plate thickness continuously increased to 8 mm, the ultimate bearing capacity increased to 2681.0 kN.m. The increased thickness did not cause difference to the bearing capacity, because of concrete crushing at the upper edge. Originality/value In this paper, based on the experimental study, the bearing capacity of hollow beam strengthened by steel plate with different thickness is extrapolated by finite element simulation, and its influence on ductility is discussed. This method not only guarantees the accuracy of the bearing capacity evaluation, but also does not require a large number of samples, and has certain economy. The research results provide a basis for the reinforcement design of similar bridges.

THE EFFECT OF MONOLITHIC SLAB THICKNESS ON THE REINFORCEMENT PARTICIPATION IN THE NEGATIVE FLEXURAL STRENGTH OF BEAMS

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Effect of Slab on the Performance of RC Frame Structures

Flexural bearing capacity of RC hollow slab beam strengthened by steel plates of different thicknesses

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Slab Reinforcement Contributions to Negative Moment Strength of Reinforced Concrete T-Beam with High Strength Steel at Exterior Beam-Column Joints

Comparison of flexural capacity of different hollow slab beams with/without pavement layer reinforced by steel plates

Effective Breadths of Concrete Slab and Effect of Slab on Steel Connections

Investigation On Flexural Behavior Of Reinforced Concrete Beams Flexurally Strengthened By Different Methods

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

ANALYZING INFLUENCE OF NONPRESTRESSED REINFORCEMENT ON THE BEHAVIOR OF UNBONDED PRESTRESSED CONCRETE BEAMS

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Analytical models for load capacities of variable thickness reinforced concrete slabs considering compressive membrane action and boundary effects

Numerical study on the structural performance of the continuous concrete slabs reinforced with hybrid BFRP/steel bars

Research on Upper Slsb Stress Influence Lower Shear Degree in Double Concrete Slab Composite Beam

Finite Element Analysis On The Mechanic Performance Of The Endplate Connections With Or Without Rc Slab

Experimental and theoretical analyses of the progressive collapse resistance of NSM strengthening RC frames after the failure of a corner column

BEHAVIOR OF CONCRETE FRAMES IN SERVICE WITH CUTTING NEGATIVE FLEXURAL REINFORCEMENT

Structural behavior of steel-concrete composite slim beam in the negative moment region

Effect of reinforcement on the response of continuous steel-concrete composite beams