Abstract:During atmospheric entry, super-/hypersonic vehicles cross distinct atmospheric layers characterized by large density variations and thus experience different flow regimes ranging from free molecular, transition, slip, to continuous regimes. Due to the distinct modeling strategy between these regimes and complex physical phenomena appearing near the vehicles (boundary-layer/shock interaction, base-flow recirculation, etc.), assessing their aerodynamic properties may be difficult. The present work focuses on supersonic flows around sharp-base geometries in both continuous and slip-flow regimes and aims at highlighting the influence of both rarefaction degree and base geometry on the vehicles’ aerodynamic features. For this purpose, three axisymmetric cone-cylinder geometries with right-angled, rounded, or flared rear parts are considered. Flow visualization, pressure, and drag measurements are carried out at Mach number [Formula: see text] and Knudsen numbers ranging from [Formula: see text] to [Formula: see text] in the supersonic rarefied MARHy wind tunnel. The experimental data are compared with numerical results of simulations performed with a continuous-flow Navier–Stokes ([Formula: see text]) solver and two rarefied flows codes: a discrete-ordinate Bhatnagar–Gross–Krook ([Formula: see text]) solver and a direct simulation Monte Carlo (SPARTA) solver. While the [Formula: see text] solver overestimates frictional drag as [Formula: see text] rises, the rarefied [Formula: see text] and SPARTA results show satisfactory agreement with experimental data. The latter numerical results highlight the main effects of rarefaction: as [Formula: see text] increases, shocks become more diffuse, skin friction strengthens (leading to a significant increase in drag coefficients), and the extent of the base-recirculation decreases. Regarding the aft-body geometry, its influence on the base recirculation vanishes with increasing [Formula: see text].

Numerical Investigation on Hyersonic Aroedynamics of Flat Plate Flying in Near Space

Numerical investigation of hypersonic aerodynamics of flat plate flying in near space

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Aerothermodynamic Shape Optimization of a Hypersonic Lifting Body

Computational Study of Drag Increase Due to Wall Roughness for Hypersonic Flight

Numerical study of flow past an axisymmetric body with a ring wing at various attack angles

Study on the Influence of Angle of Attack on the Aerodynamic Performance of Aerospike Structure of Hypersonic Vehicle

Flow and heat transfer analysis of laminar flow in hypersonic aircraft with variable specific heat capacity at small attack angles

Investigation of Hypersonic Flows Through a Cavity with Sweepback Angle in Near Space Using the DSMC Method*

Wake dynamics of low-Reynolds-number flow around a two-dimensional airfoil

Effects of continuum breakdown on aerodynamics of near space vehicle

Numerical Investigation of the Aerodynamic Characteristics of a Missile

Evaluation of Various Flow Control Methods in Reducing Drag and Aerodynamic Heating on the Nose of Hypersonic Flying Objects

A Three-Dimensional Numerical Investigation on Drag Reduction of a Supersonic Spherical Body with an Opposing Jet

Numerical Investigation of RCS Jet Interaction on a Hypersonic Vehicle

Parametric Study on the Drag and Heat Flux Reduction Mechanism of Forward-Facing Cavity on a Blunt Body in Supersonic Flows

Numerical simulation on aerodynamic performance of dorsal S-shaped inlet

Numerical Simulation Investigation on Plasma Injection for Drag Reduction of Hypersonic Vehicle

Numerical investigation of an advanced aircraft model during pitching motion at high incidence

Influence of Rarefaction Degree and Aft-Body Geometry on Supersonic Flows

DSMC Numerical Simulation for Flow around 2-D Blunt Bodies with Unstructured Grid