Abstract:This paper developed a two-dimensional axisymmetric analytical model for layered landfills with vertical wells. The model uses a horizontal layered structure to describe the waste non-homogeneity with depth in gas generation, permeability and temperature. The governing equations in the cylindrical coordinate system were transformed to dimensionless forms and solved using a method of eigenfunction expansion. After verification, the effects of different well boundary conditions and gas extraction systems on recovery efficiency were investigated. A dimensionless double-layer system, consisting of a cover and a waste layer, was also explored. The results show that a constant vacuum pressure boundary condition can be enough to describe a perforated pipe surrounded by drainage gravel with a reasonable value of well radius, such as half the radius of gravel fill. Also, the 7 independent variables (one marked with an asterisk is dimensionless) of a double-layer system can be integrated into 3 dimensionless ones: Cover permeability K-v1(*)/(Vertical gas permeability of waste K-v2(*) x Cover thickness h(1)(*)) - Vacuum pressure P-w x PatmKv2*/(mu RgT2 x Gas generation rate of waste s(2)) and ln(Well radius r(w)(*))/(Anisotropy degree of waste Id). The integration is based on the inherent mechanism of this flow system with certain simplification. The effects of these variables are then quantitatively characterized for a better understanding of gas recovery efficiency. Same recovery efficiency can be achieved with different variable combinations. For example, increasing h(1)(*)(such as doubling it) has the same effect with decreasing K-v1(*)(such as halving it). Along with the reduction of variables by half, the integration can facilitate the preliminary design, and is a small but important advance in the consideration of MSW non-homogeneity. (C) 2017 Elsevier Ltd. All rights reserved.

Bulk Ablation Model with Double Zones for EPDM in Gas Phase Environment

A volumetric ablation model of EPDM considering complex physicochemical process in porous structure of char layer

Numerical analysis of ablative behavior of silicone resin coated carbon fabric

Research and Engineering Computation of Ablation Character of Carbon Phenolic Aldehyde Composite Material

Experimental study on the mechanism of gas accumulation and soil deformation in double-layered soil

Effects of Gas-Phase Speed on Insulator Ablation of Solid Rocket Motor Chamber

Influence Factors on the Multi-Field Coupling Performances of Charring Ablators on the Basis of a Mesoscopic Ablation Model

Experimental Study on Charring Layer Surface Phases of EPDM Insulator in Elevated Temperature

Unraveling the Ablative Behavior Through the Design of a POSS-Benzoxazine/EPDM Network under Harsh Environments

A Gas Flow Model for Layered Landfills with Vertical Extraction Wells.

Mesoscopic modeling of mechanical erosion for the ablation-erosion behavior of 3D C/C composites

A theoretical model considering the photochemical and photothermal behavior of arc radiation-induced gassing materials ablation

Engineering Method for the Thermal Mechanical Erosion of C/C Composite with the Mesoscale Ablation Model

Nonequilibrium Ablation of Phenolic Impregnated Carbon Ablator

Modeling ablative behavior and thermal response of carbon/carbon composites

Numerical research on intense pulsed ion beam ablation plasma expansion into ambient gases

Evaluation of the Effective Properties of High Silica/Phenolic Composite under Volumetric Ablation Condition

Modeling and Validation of Ablative Thermal Response Combined with Microscopic Heat Transfer for Porous Ablative Materials

Surface and Volumetric Ablation Behaviors of Sifrp Composites at High Heating Rates for Thermal Protection Applications

Numerical analyses of ablative behavior of C/C composite materials

Ablation Mechanism and Properties of Silica Fiber-Reinforced Composite Upon Oxyacetylene Torch Exposure