Abstract:The effect of cascade aerodynamic optimization on turbomachinery design is very significant. However, for most traditional cascade optimization methods, aerodynamic parameters are considered as boundary conditions and rarely directly used as the optimization variables to realize optimization. Given this problem, this paper proposes an improved cascade aerodynamic optimization method in which an incidence angle and nine geometric parameters are used to parameterize the cascade and one modified optimization algorithm is adopted to find the cascade with the optimal aerodynamic performance. The improved parameterization approach is based on the Non-Uniform Rational B-Splines (NURBS) method, the camber line superposing thickness distribution molding (CLSTDM) method, and the plane cascade design method. To rapidly and effectively find the cascade with the largest average lift-drag ratio within a certain range of incidence angles, modified particle swarm optimization combined with the modified very fast simulated annealing algorithm (PSO-MVFSA) is adopted. To verify the feasibility of the method, a cascade with NACA4412 and a practical cascade are optimized. It is found that the average lift-drag ratios of two optimal performance cascades are respectively increased by 13.38% and 15.21% in comparison to those of two original cascades. Meanwhile, through optimizing the practical cascade of the Blade D500, under different volume flow rates, the pressure coefficient of the optimized cascade is increased by an average of more than 6.12% compared to that of the prototype, and the average efficiency is increased by 11.15%. Therefore, this improved aerodynamic optimization method is reliable and feasible for the performance improvement of cascades with a low Reynolds number.

Optimization and Numerical Simulation of High-Turning Tandem Cascade

Unsteady Study on the Effects of Matching Characteristic of Tandem Cascade on the Performance and Flow at Large Angle of Attack

A Study of Parameter Optimization of Axial Compressor Tandem Cascade

Multi-Objective Optimization Design and Analysis of High-Turning Tandem Cascade

Design and Optimization of Tandem Cascade Based on Parallel Differential Evolution Algorithm

Investigation of Differential Evolution Algorithm for a Tandem Cascade Optimization

Numerical Investigation of Aerodynamic Characteristics in Tandem Cascades with Various Curving Strategies

Analysis of Flow Characteristic of Transonic Tandem Rotor Airfoil and Its Optimization

Applications of an Improved Aerodynamic Optimization Method on a Low Reynolds Number Cascade

Study on Flow Structure of a Highly-Loaded Compressor Cascade Designed with Active and Passive Flow Control Methods

Investigations on Aerodynamic Performance of Turbine Cascade at Different Flow Conditions

Effect of Leading Edge Little Blade on Performance of Highly Loaded Compressor Cascades

Numerical and Experimental Investigation of an Axial Compressor Flow with Tandem Cascade

Numerical Investigations of Aerodynamic Characteristics in Highly Loaded Tandem Cascades with End-Bend

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Flow quality improvement of the wind tunnel testing for a highly-loaded compressor cascade at high incidence

Numerical Study on the Clearance Effects of a High-turning Tandem Cascade

Multi-Objective Optimization Design Method For Tandem Compressor Cascade At Design And Off Design Conditions

Performance-Driven Multi-Objective Optimization Method for DLR Transonic Tandem Cascade Shape Design

Influence on Aerodynamic Performance of Turbine Cascade by Experiment and Numerical Simulation

Design Strategy and Relevant Flow Mechanisms of Highly Loaded 3D Compressor Tandem Cascades