Abstract:Abstract Driven by the goal of studying the temperature changes in the nozzle and equipment cabin of solid rocket motor during the whole process of ignition starting, working, cooling and decompression, this paper uses the fluid dynamics software which uses the RNG k-ε turbulence model to simulate the mixing of the fuel and oxidant and the Sutherland law to describe the viscosity of gas and air, and the controlling equation is the two-dimensional axisymmetric viscous compressible URANS equation. In this paper, the temperature field of the nozzle and equipment cabin in the working process of solid rocket motor during 0 ∼ 60s is numerically simulated, and the ground experiment is carried out. The results show that (1) the numerical simulation results are in good agreement with the ground test results, and the absolute value of the maximum error appears at the time of 60s, which is 5.9k. indicating that the numerical calculation method and heat source equivalent method established in this paper are suitable for the temperature field simulation of composite structure nozzle and equipment cabin, (2) the unsmooth surface of the nozzle formed by high temperature ablation makes the flow situation in the divergent section of the nozzle complex and affects the heat transfer coefficient of the wall contacting with the equipment cabin, (3) due to the insulation design of the equipment cabin, only a small part of the heat is transferred to the equipment cabin. During the whole working process of solid rocket motor, the temperature field of equipment cabin increases sharply at both ends and gently in the middle.

Three dimension numerical simulation of heat transfer in regeneratively cooled nozzle

Numerical simulation of regeneraive cooling flow and heat transfer with nonequilibrium flow

Numerical Simulation of Regenerative Cooling in Two Dimensional Plug Nozzles

Numerical Simulation of Liquid Rocket Engine Thrust Chamber Regenerative Cooling

Numerical simulation of liquid film and regenerative cooling in a liquid rocket

Numerical simulation of liquid film and regenerative cooling in a rocket combustor

Numerical simulation for fluid-solid thermal coupling of fuel-rich pasty propellant in combustion spray head of ramjet

Numerical Simulation of Flow and Heat Transfer in Round-to-Rectangular Nozzles

Numerical Study on Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling

Numerical investigation of heat transfer and fluid flow in cooling channel of H2/O2 liquid rocket engine thrust chamber

Numerical Simulation on Flow and Heat Transfer Characteristics of Film/Regenerative Compound Cooling Process

3D heat transfer investigation on plug nozzle in different operation condition

Flow and thermal analyses of regenerative cooling in non-uniform channels for combustion chamber

The numerical research for heat transfer of liquid-solid coupling on SRM nozzle throat

Numerical Study of Film and Regenerative Cooling in A Thrust Chamber at High Pressure

Numerical Simulation Coupling on Fluid Flow and Heat Transfer in Nozzle and Equipment Cabin of Solid Rocket Motor during Operation Process

A Coupled Heat Transfer Calculation Strategy for Composite Cooling Liquid Rocket Engine

Numerical modeling of heat transfer behavior for two-phase flow in a nozzle considering phase change

Coupled Numerical Simulation of Combustion and Regenerative Cooling in Lox/Methane Rocket Engines

Numerical Simulation of Three Dimensional Nozzle Flows by Using NND Difference Scheme

Heat Transfer Performance of Regenerative Cooling in the Presence of Supersonic Combustion Based on Two-Way Decoupling Method