Abstract:In this study, the thermophysical properties and rapid solidification mechanism of highly undercooled liquid Zr 60 Ni 25 Al 15 alloy were investigated through the electrostatic levitation technique. The maximum undercooling of this alloy has attained 316 K (0.25 T L ). Both density and surface tension displayed a linear relationship with temperature, while viscosity demonstrated an exponential temperature dependence. When alloy undercooling was less than 259 K, two significant recalescence events were observed during solidification, corresponding to the formation of pseudobinary (Zr 6 Al 2 Ni + Zr 5 Ni 4 Al) eutectic and ternary (Zr 6 Al 2 Ni + Zr 5 Ni 4 Al + Zr 2 Ni) eutectic. The growth velocity of the binary eutectic phase gradually increased with undercooling and reached the maximum value at an undercooling of 259 K. In contrast, once undercooling surpassed 259 K, a single recalescence event occurred, leading to the independent nucleation of all three compound phases from alloy melt and the rapid growth of a ternary anomalous eutectic structure. Notably, the growth velocity of the ternary eutectic phase exhibited a gradual decline with the continued increase in undercooling. This diminishing trend of the growth velocity suggests, hypothetically, that further increasing the undercooling might entirely suppress crystal growth dynamically at a threshold of 385 K. With classical nucleation theory and the Kolmogorov-Johnson-Mehl-Avrami (KJMA) model, the onset of crystallization for the three phases was calculated, leading to construct a time-temperature-transformation (TTT) diagram. This diagram elucidates the competitive nucleation among the three phases in the undercooled melt. Both theoretical and experimental evidences revealed that Zr 6 Al 2 Ni phase primarily nucleated at lower undercooling levels, whereas the simultaneous nucleation of all three phases becomes feasible at higher undercooling.

BULK AMORPHOUS SOLIDIFICATION IN ULTRA CLEAN ENVIRONMENT

Solidification Thermodynamics of Bulk Amorphous Zr41.2 Ti13.8 Cu12.5 Ni10 Be22.5 Alloy

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Microstructure Refinement Mechanism of Undercooled Cu55Ni45 Alloys

Crystallization of high stable Zr55Al10Ni5Cu30 bulk amorphous alloy

Study on isothermal crystallization kinetics of Zr55.7Cu22.4Ni7.2Al14.7 bulk amorphous alloy

Solidification Microstructure Evolution and Grain Refinement Mechanism under High Undercooling of Undercooled Ni90Cu10 Alloys

BULK AMORPHOUS Zr-Cu-Ni-Al-Hf-Ti ALLOYS WITH SUPERCOOLED LIQUID REGION OVER 140℃

Study on crystallization process of Zr-based bulk amorphous alloy by a heat expansion method

Rapid Viscous Flow of the Supercooled Liquid of Zr-Based Bulk Amorphous Alloy

Thermophysical properties and rapid solidification mechanism of liquid Zr 60 Ni 25 Al 15 alloy under electrostatic levitation condition

Cooling Rate Effects on the Microstructure and Phase Formation in Zr51Cu20.7Ni12Al16.3bulk Metallic Glass

Cooling rate effects on the microstructure and phase formation in Zr51Cu20.7Ni12Al16.3 bulk metallic glass

Dynamic Crystallization Process in A Supercooled Liquid Region of Cu40ti30ni15zr10sn5 Amorphous Alloy

Unusual Solidification Behavior of a Zr–Cu–Ni–Al Bulk Glassy Alloy Made from Low-Purity Zr

SOLIDIFICATION BEHAVIOR AND MICROSTRUCTURE EVOLUTION OF Fe83B17 EUTECTIC ALLOY UNDER HYPER-UNDERCOOLING

The Performance of Bulk Amorphous Alloy Zr55Al10Ni5Cu30 in Super-cooling Liquid Region

Effect of Oxygen on the Thermal Stability of Zr-Cu-Ni-Al-Ti Bulk Amorphous Alloy

Critical Cooling Rate and Microstructure Evolution of Cu-Based Bulk Amorphous Alloy

Decomposition of Amorphous Zr41ti14cu12.5ni10be22.5 Alloy: As Investigated by Small Angle Neutron Scattering