Abstract:This paper describes the redesign of a high pressure rotor (with exit Mach number around 1.5) for the vaneless counter-rotating turbine by choosing adequate exit-to-throat width ratio. Based on the previous design analysis and test results, effects of the exit-to-throat width ratio on the performance of the transonic turbine cascade were proposed. In order to investigate the influence of the exit-to-throat width ratio on the performance of the turbine cascade, a flow model of the convergent-divergent turbine cascade was constructed by using the theory of Laval nozzle. Then a method on how to choose the adequate exit-to-throat width ratio for the turbine cascade was proposed. To validate the method, it was used to calculate the adequate exit-to-throat width ratio for the high pressure rotor of the vaneless counter-rotating turbine. The high pressure turbine rotor was redesigned with the new exit-to-throat width ratio. Numerical simulation results show that the isentropic efficiency of the redesigned vaneless counter-rotating turbine under the design condition has increased by 0.9% and the efficiencies under the off-design conditions are also improved significantly. On the original design, a group of compressional waves are created from the suction surface after about 60% axial chord in the high pressure turbine rotor. While on the new design the compressional waves are eliminated. Furthermore, on the original design, the inner-extending waves first impinge on the next high pressure turbine rotor suction surface. Its reflection is strong enough and cannot be neglected. However on the new design the inner-extending waves are weakened or even eliminated. Another main progress is that the redesigned high pressure turbine rotor is of practical significance. In the original rotor, a part of the blade (from 60% axial chord to the trailing edge) is thin leading to the intensity problem and difficult arrangement of the cooling system. In the new design, however, the thickness distribution of the rotor airfoil along the chord is relatively reasonable. The intensity of the rotor is enhanced. It is possible to arrange the cooling system reasonably.

Effects of High-Pressure Guide Vane Adjustment on 1＋1/2 Counter-Rotating Turbine

Numerical Investigation of Flow and Loss in a Variable High-Pressure Guide Vane of 1＋1/2 Counter-Rotating Turbine

BASIC ANALYSIS ON 1+3/2 AND 1+1/2 COUNTER-ROTATING TURBINES

Experimental Study on the Aerodynamic Performance of Variable Geometry Low-Pressure Turbine Adjustable Guide Vanes

The Effects of Variable Geometry Turbine on the Turbine Aerodynamic Performance

Aerodynamic Performance Analysis of a Novel Geometry-variable Turbine Guide Vane with a Fixed Angle of Attack

Experimental and Numerical Investigation on Flow Characteristics of a Vaneless Counter-Rotating Turbine at Off-Design Conditions

EFFECT OF DIVERGENT RATIO ON PERFORMANCE OF VANELESS COUNTER-ROTATING TURBINE HIGH PRESSURE ROTOR

Three-dimensional Numerical Investigation of Vaneless Counter-Rotating Turbine

Research of the performance of a vaneless counter-rotating turbine on the off-design conditions

Influence of exit-to-throat width ratio on performance of high pressure convergent-divergent rotor in a vaneless counter-rotating turbine

Study on the Influence of Guide Vane Opening on Pressure Pulsation of Pump-Turbine under Zero Flow Pump Condition

Influence of Tip Clearance Size on Flow Characteristics of a Vaneless Counter-Rotating Turbine

Influence Of Guide Vane Shapes On Hydraulic Characteristics For A Shaft-Extension Tubular Pump Turbine At Turbine Mode

Study of Pump-Turbine＇s Pumping Mode at Different Openings of Guide Vane

High-Fidelity Simulations of a High-Pressure Turbine Vane Subject to Large Disturbances: Effect of Exit Mach Number on Losses

Basic analysis Of a counter-rotating turbine

Analysis on the effect of variable guide vane numbers on the performance of pump as turbine

Numerical Investigation of Guide Vane Hydraulic Torque Characteristics of a Pump Turbine in Pump Mode

Performance analysis of a new type of space guide vane for T-type hydraulic turbine

Analysis of the Flow Energy Loss and Q-H Stability in Reversible Pump Turbine as Pump with Different Guide Vane Opening Angles