Abstract:A novel MEMS vibratory gyroscope was fabricated by our research group,and its structure,packaging,signal detection and performance measurement were described.The dual-mass MEMS vibratory gyroscope was designed by a structure-decoupled method and prepared by the Deep Dry Silicon On Glass(DDSOG).To improve the mechanical sensitivity,reliability and stability,the gyroscope was packaged by vacuum technology and the common mode disturbance caused by axial acceleration was also eliminated.A self-resonance drive circuit with Automatic Gain Control(AGC) was employed in the drive closed loop to keep the stable amplitude and frequency of the drive-mode.The open loop detect circuit was adopted to simplify the whole control system.In order to reduce the temperature impact on the bias of gyroscope,the gyroscope's outputs within a certain temperature range were studied,and the relationship model between gyroscope outputs and temperature was established.On the basis of the model,a proper temperature real-time compensation system using a platinum resistor was designed to reduce the power comsumption,meanwhile to minimize the volume of the system.The experiment results show that the gyroscope has a quality factor above 100 000,the operating range of ±500(°)/s with the scale factor of 21.453 mV·(°)-1·s-1 and nonlinearity and asymmetry errors of 36.905×10-6 and 184.125×10-6 respectively.Moreover,at room temperature the bias of the gyroscope is 7.714 3(°)/h over a 100 Hz bandwidth,the whole system volume is 31 mm×31 mm×12 mm and the power consumption is 288 mW.The proposed vibratory gyroscope has a promising prospect for the inertial navigation system with a medium accuracy due to its high performance,small volume and low power consumption.

Research Status and Development Trend of Multi?ring Resonant Micromechanical Gyroscope

Structure Design and Structural Parameter Optimization of Fully Symmetric Vibratory Gyroscope

Overview and Analysis of MEMS Coriolis Vibratory Ring Gyroscope

A Micro-Machined Silicon Vibrating Ring Gyroscope

MEMS and MOEMS Gyroscopes:A Review

Research Development of MEMS Micro-Gyroscopes

Research Status and Development of Micromachined Rotational Gyroscopes with Levitating Rotor

Study on New Development and Future Trends of Micromachined Gyroscopes

Recent Development of Resonant Micro Cavity in Resonant Micro-Optical Gyro

Reaearch Development of Quartz Micromachined Gyroscopes

High performance electromagnetic micro-machined ring vibration gyroscope

Design and Experiment of Micro Machined Vibratory Gyroscope

Design, Fabrication, and Characterization of a Multi-curved Surface Fusion Metal Resonant Gyroscope

Silicon Micromechanical Resonant Gyroscope

Status Quo and Developing Trend of MEMS-Gyroscope Technology

A Novel Microelectromechanical Resonant Gyroscope

Design and Simulation of Novel MEMS Resonant Gyroscope

Design of multi-degree-of-freedom micromachined vibratory gyroscope with double sense-modes

Development and Progresses in Micromachined Dual Input Axis Gyroscopes

Design and manufacture of silicon MEMS resonant gyroscope

Design, Fabrication, and Characterization of a Multicurved Surface Fusion Metal Resonant Gyroscope