Abstract:The deformation monitoring of subway tunnel is of extraordinary necessity. Therefore, a method for deformation monitoring based on terrestrial point clouds is proposed in this paper. First, the traditional adjacent stations registration is replaced by section-controlled registration, so that the common control points can be used by each station and thus the error accumulation avoided within a section. Afterwards, the central axis of the subway tunnel is determined through RANSAC (Random Sample Consensus) algorithm and curve fitting. Although with very high resolution, laser points are still discrete and thus the vertical section is computed via the quadric fitting of the vicinity of interest, instead of the fitting of the whole model of a subway tunnel, which is determined by the intersection line rotated about the central axis of tunnel within a vertical plane. The extraction of the vertical section is then optimized using RANSAC for the purpose of filtering out noises. Based on the extracted vertical sections, the volume of tunnel deformation is estimated by the comparison between vertical sections extracted at the same position from different epochs of point clouds. Furthermore, the continuously extracted vertical sections are deployed to evaluate the convergent tendency of the tunnel. The proposed algorithms are verified using real datasets in terms of accuracy and computation efficiency. The experimental result of fitting accuracy analysis shows the maximum deviation between interpolated point and real point is 1.5mm, and the minimum one is 0.1mm; the convergent tendency of the tunnel was detected by the comparison of adjacent fitting radius. The maximum error is 6mm, while the minimum one is 1mm. The computation cost of vertical section abstraction is within 3 seconds/section, which proves high efficiency..

Research on Optimized Surveying of Horizontal Displacement in Subway Tunnel during Metro Operation Phase

Effect of nearby undercrossing tunneling on the deformation of existing metro tunnel and construction control

Measurement on Soil Deformation and Numerical Simulation During Tunneling Process

Long-Term Monitoring and Safety Evaluation of A Metro Station During Deep Excavation

Automatic subway tunnel displacement monitoring using robotic total station

Monitoring and Analysis of the Impact of Adjacent Bridge Pile Construction on Subway Tunnels

3D Monitoring Model for Real‐Time Displacement of Metro Tunnel under "Dual Carbon" Background

Deformation Monitoring of Metro Tunnel with a New Ultrasonic-Based System

Deformation Monitoring and Performance Analysis on the Shield Tunnel Influenced by Adjacent Deep Excavations

Long-Term Deformation Monitoring of Metro-Tunnel Airshaft Excavation During Construction Stage.

An Investigation on Longitudinal Surface Subsidence Deformation of Large-Span Undercut Metro Tunnel

Monitoring data analysis on the influence of large deep foundation pit excavation on nearby metro shield tunnel

Method for Tunnel Displacements Calculation Based on Mobile Tunnel Monitoring System

Dynamic Analysis of Metro Train-Monolithic Bed Track System under Tunnel Differential Settlement

Research on Surface Subsidence of Long-Span Underground Tunnel

Structural Monitoring of Metro Infrastructure During Shield Tunneling Construction.

Research on Joints Properties for Tunnel Convergence Deformation of Operating Metro

Discrete Element Modeling of a Cross-River Tunnel under Subway Train Operation During Peak and Off-Peak Periods

Deformation Detection Method of Mine Tunnel Based on Mobile Detection System

Continuously Deformation Monitoring of Subway Tunnel Based on Terrestrial Point Clouds

Research on convergence analysis method of metro tunnel section--Based on mobile 3D laser scanning technology