Abstract:As a result of local factors, limited amounts of land and construction demands, subway lines are sometimes designed to run in close proximity to buildings. Hence, using a real Beijing subway engineering project, we have studied the vibration induced in a building by a moving rail vehicle. A numerical model of the spatially coupled vehicle–track–building system was developed to predict the vibration levels in the structure. The modeling theory was verified by comparison with multi-body system simulations and field test results. Two common types of track, namely, ballasted track and floating slab track were studied and their vibration-mitigation effects were compared in the time and frequency domains. A comparison of the particle peak velocities with the structural vibration limits of the floating floor slab and the first floor of a building revealed a very low possibility of severe damage resulting from vehicle-induced vibration for both types of tracks. We also conducted a one-third octave analysis of the vibration of each building floor and obtained the weighted root-mean-squared acceleration and vibration levels. A comparison of the weighted accelerations with the vibration limits for vibration perception by a human for both types of tracks also revealed that train-induced vibration had no obvious effect on daily human activities on most of the floors. The main exception to this observation was the first floor, which is located close to the vibration source. It is recommended that the first floor should be used for purposes other than residential. Furthermore, a comparison of the vibration levels of each floor for both types of tracks showed that the ballasted track had a better vibration-mitigation effect than the floating slab track for this special engineering case.

Prediction and Analysis of Adjacent Building Vibration Caused by Metro Operation

Prediction of Vibration Impact of Metro Trains on Adjacent Sensitive Buildings

The Prediction Method of Metro Trains Induced Vibration Inside Adjacent Buildings Based on Pulse Excitation

Predicting the Influence of Vibration from Trains in the Throat Area of a Metro Depot on Over-Track Buildings

Prediction of effects of vibration induced by running metro trains on sensitive instruments

Analytical prediction model of ground vibration response induced by metro floating-type track

Prediction of metro train-induced low frequency vibration responses in far field

Assessment of adjacent building vibrations induced by metro with a multigrid fully coupled method

Prediction of Influence of Metro Trains Induced Vibrations on Sensitive Instruments

Practical Back-Analysis Methodology to Predict Underground Train-Induced Building Vibrations

Test and Numerical Analysis of Subway-Induced Vibrations of Metro-Line Nearby Buildings

Numerical simulation and model prediction for environmental vibrations induced by metro operation

Prediction of Vibrations from Underground Trains on Beijing Metro Line 15

Vibration evaluation of metro depot superstructure based on finite element method

Prediction of Structural Vibrations Using a Coupled Vehicle-Track–building Model

Prediction and mitigation of building vibrations caused by train operations on concrete floors

Prediction and mitigation of train-induced vibrations of over-track buildings on a metro depot: Field measurement and numerical simulation

Dynamic Effect of Train-Induced Vibration on Historic Buildings

Testing and Analysis of Metro-Induced Ground Vibrations Response near Beijing Metro Line 1

Vibration of single-story masonry structures induced by subway through in-situ tests

Law of Vibrations Influence of Subway on Metro Depot Superstructure