Abstract:Frequent train operations in metro depots can have adverse effects on the buildings' occupants in terms of feelable vibration and noise. A method is proposed to predict vibration transmissions from columns into girders and subsequently into the floors. This method is quite efficient in modeling and computation, saving engineers time and computational cost. It is highly useful in the design phase for identifying undesirable feelable vibration and audible noise within buildings and for developing mitigation measures that improve human comfort, operation of sensitive equipment, and manufacturing.Train-induced ground-borne vibration in metro depots transmits into the upper floors of over-track buildings primarily through axial waves in the supporting columns. The vertical vibration of a column at a floor inputs mechanical power into the attached girders based on their impedance at the column. An analytical model of the girder impedance is developed that accounts for the coupling to the floor and for composite action where in-plane deformation in the floor stiffens the girder. Along with the measured vibration velocity levels at the columns, impedances of the coupled floor and girders are used to predict the mechanical power input at individual columns into the girders. The input mechanical power generates bending waves in the girders with subsequent transmission out into the attached floor along their length. The resulting average floor vibration levels in the bay are predicted in response to the total mechanical power input, which in turn radiate noise from the floor structure into the room.The overall model from vibration inputs at the columns to room noise levels was applied to a 4-story over-track building during train passbys under the building in the Qianhai Metro Depot in Shenzhen, China. The predicted average floor vibration levels and room noise levels were in good agreement with their corresponding measurements.

Prediction of Vibration Impact of Metro Trains on Adjacent Sensitive Buildings

Prediction of effects of vibration induced by running metro trains on sensitive instruments

Predicting the Influence of Vibration from Trains in the Throat Area of a Metro Depot on Over-Track Buildings

Prediction of Influence of Metro Trains Induced Vibrations on Sensitive Instruments

Prediction of Vibrations from Underground Trains on Beijing Metro Line 15

Prediction of Structural Vibrations Using a Coupled Vehicle-Track–building Model

Prediction of metro train-induced low frequency vibration responses in far field

Predict the Influence of Environmental Vibration from High-Speed Railway on Over-Track Buildings

Method for Predicting Environmental Vibration Impact of Existing Subway Lines and Its Practical Application

Prediction and mitigation of train-induced vibrations of over-track buildings on a metro depot: Field measurement and numerical simulation

Prediction and mitigation of building vibrations caused by train operations on concrete floors

Prediction and mitigation of train-induced vibrations of large-scale building constructed on subway tunnel

Dynamic Effect of Train-Induced Vibration on Historic Buildings

Train-Induced Vibration Prediction and Control of a Metro Depot and Over-Track Buildings

Assessment of adjacent building vibrations induced by metro with a multigrid fully coupled method

Vibration evaluation of metro depot superstructure based on finite element method

Prediction of low-frequency ground response to metro induced vibrations

Practical Back-Analysis Methodology to Predict Underground Train-Induced Building Vibrations

Dynamic Prediction and Evaluation System Based on Sensitivity of Environmental Vibration Induced by Metro Trains

Test and Numerical Analysis of Subway-Induced Vibrations of Metro-Line Nearby Buildings

Train-induced Floor Vibration and Structure-Borne Noise Predictions in a Low-Rise Over-Track Building