Abstract:Condensation in the main steam pipe is harmful for the downstream steam turbine. If the condensation water has not been completely drained from the main pipeline, the droplet will lead to the water hammer and cause unstable operations for the power station. As a result, accurate predictions of the water condensation during the startup and stable running processes are helpful for the drainage system operations and controls. In the power station, the main pipeline consists of pipe and outside insulation layer which prevents the heat loss thus improves the thermal efficiency. In this case, complex heat transfers including heat convection, conduction and radiation occur from the water-steam side to the atmospheric environment. In the current study, by using the theoretical methods, heat transfer and water condensation rate in the main steam pipe for the nuclear power station are calculated. Firstly, heat convection from the steam to the pipe, heat conduction in the pipe and insulation layer, and natural convection outside the insulation layer are computed and analyzed based on heat transfer theory and empirical correlation expressions. Secondly, in order to visualize the wetness distributions and pressure loss, the corresponding CFD computations with equilibrium condensation model is additionally utilized. Compared to the theoretical predictions, numerical result shows the same trend of the condensation and heat transfer loss. Finally, a new theoretical method without specifying the outer wall temperature of the insulation layer is developed. It shows that this method can predict a reasonable condensation rate and is convenient for the industrial applications.

Design study of the draining system of steam power ships

A Parametric Study on Cavitation Flow Through Steam Trap Valves under High Pressure Difference

AN OPTIMIZATION STUDY ON CAVITATION FLOW IN A STEAM TRAP VALVE

Application and Design of an Efficient Siphon Dewatering System for Debris Flow Mitigation: A Case Study of a Small Catchment in Zhejiang Province, China

Hydraulic and thermal coupling calculation for the steam pipe network of ships

Study on Design of the Power Station of Electric Propulsion Ship with Rudder Propeller in Rapid Waterway

Study on the dynamic characteristics of the overflow advection and diffusion of trailing suction hopper dredgers based on CFD

A mathematical model and its solution for unsteady flow under siphon drainage by fully penetrating well in soft ground

Aerodynamics Analysis of Superheated Steam Flow Through Multi-Stage Perforated Plates

Overview of Theory, Simulation, and Experiment of the Water Exit Problem

Simulation of Waste Heat Recovery From Ship Boiler Exhaust Gas

Study on the Operating Process of an Underwater Diesel Engine

Investigation on thermo-economic performance of shipboard waste heat recovery system integrated with cascade latent thermal energy storage

Study on Dynamic Characteristics and Optimal Design Method of Vacuum Drainage System

Calculation of Ship Sinkage, Trim and Wave Drag Using High-Order Rankine Source Method

Small and Medium-sized Ship Exhaust Heat Recovery Device Based on Vortex Tube Effect Verification

Theoretical Investigations On Water Condensation In Main Steam Pipe

Research on Hull Form Design and Numerical Simulation of Sinkage and Trim for a New Shallow-Water Seismic Survey Vessel

A Review of Waste Heat Recovery on Two-Stroke IC Engine Aboard Ships

Study on the design calculation method and construction control method of suction drum foundation for guided frame platform

Methods and measures about utilization of waste gas of super lager ships