Abstract:Jacket foundations for offshore wind turbines, typically having three or four latticework legs, are mainly subjected to lateral loads induced by winds, waves and currents during their service life. An accurate assessment of the bearing capacity of these foundations is of great importance in the design. This paper presents a study into the monotonic lateral loading behavior of tetrapod piled jacket foundations in undrained clay, with the complex lateral loads being simplified to an equivalent lateral load acting at a certain height of the jacket. A centrifuge testing programme was undertaken to provide high-quality validation data for the development of a three-dimensional finite element model established using ABAQUS. The key parameters investigated are the spacing and embedment of the piles, the height to which the equivalent lateral load acts and the angle between the direction of this load and the orthogonal line of the jacket in the horizontal plane. The parametric study aims to provide guidance to the optimal design of jacket piled foundations: for instance, to examine the critical pile embedment beyond which limited improvement of the bearing capacity of the foundation can be achieved and to define the most unfavorable lateral loading direction. In addition, the limitations of the commonly assumed constant p-multiplier, regardless of the lateral deflection of the pile and the depth along it, are critically discussed. Then an improved analytical model is proposed, based on the existing model used in design and the parametric study results, to quantify the variation of p-multiplier with depth and with pile deflection.

Calculation of Horizontal Wave Force and Wave Buoyance Acted on Circular-Sectioned Pier

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Analysis Approach of Piled Jacket Foundation in Sand for Offshore Wind Turbines Subjected to Lateral Loads

Numerical Analysis Impact of Ship Building & Repairing on Surrounding Waters

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Wave-induced Liquefaction of the Seabed Around a Single Pile Considering Pile–soil Interaction

A Study on the Calculation Method of Wave Crest Height and Panel Wave Force of a New Barrel-Pile Foundation Composite Structure Wharf

The influence of incident angles and length-diameter ratios on the round-ended cylinder under regular wave action

New Formula for Scour Depth at Piles Based on Energy Equilibrium

Estimation of Maximum Local Scour Depths at Multiple Piles of Sea/Bay-crossing Bridges

Experimental study on tsunami wave forces on round-ended piers

Numerical Study on Wave Dissipation and Mooring Force of a Horizontal Multi-Cylinder Floating Breakwater

Simplified Calculation of Equivalent Wind Loads of High Pier Continuous Rigid Frame Bridge in Double Cantilever State

THE CALCULATION FOR THE HORIZONTAL WAVE FORCES AND THEIR OVERTURNING MOMENT ON PERFORATED CAISSONS WITH TOP COVER

Numerical Computation of Wave Diffraction in Port Basin

Circumferential Distribution of Chloride Penetration of Seaport Wharf

Numerical investigation of dynamic soil response around a submerged rubble mound breakwater

Semi-analytical solution of cnoidal wave diffraction around a double-layer arc-shaped vertical porous breakwater

The study of hydrodynamic load on a submerged floating tunnel tube in an ideal fluid layer under the action of earthquake P-wave

The Layered Integrating Method for Calculating Wave Force of Submerged Floating Tunnel Based on Morison Equation

On Calculation Method of Wave Uplift Forces Acting on Offshore Open Structure