Abstract:Jacket foundations for offshore wind turbines, typically having three or four latticework legs, are mainly subjected to lateral loads induced by winds, waves and currents during their service life. An accurate assessment of the bearing capacity of these foundations is of great importance in the design. This paper presents a study into the monotonic lateral loading behavior of tetrapod piled jacket foundations in undrained clay, with the complex lateral loads being simplified to an equivalent lateral load acting at a certain height of the jacket. A centrifuge testing programme was undertaken to provide high-quality validation data for the development of a three-dimensional finite element model established using ABAQUS. The key parameters investigated are the spacing and embedment of the piles, the height to which the equivalent lateral load acts and the angle between the direction of this load and the orthogonal line of the jacket in the horizontal plane. The parametric study aims to provide guidance to the optimal design of jacket piled foundations: for instance, to examine the critical pile embedment beyond which limited improvement of the bearing capacity of the foundation can be achieved and to define the most unfavorable lateral loading direction. In addition, the limitations of the commonly assumed constant p-multiplier, regardless of the lateral deflection of the pile and the depth along it, are critically discussed. Then an improved analytical model is proposed, based on the existing model used in design and the parametric study results, to quantify the variation of p-multiplier with depth and with pile deflection.

The influence of incident angles and length-diameter ratios on the round-ended cylinder under regular wave action

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Study on Applicability of Modal Analysis of Thin Finite Length Cylindrical Shells Using Wave Propagation Approach

Numerical Study of the Interaction Between an Internal Solitary Wave and a Submerged Extended Cylinder Using OpenFOAM

Calculation Method of Wave Forces on Large Round-Ended Caisson Foundation

Numerical Investigation of an Internal Solitary Wave Interaction with Tandem Horizontal Cylinders

Experimental study on tsunami wave forces on round-ended piers

Calculation of Horizontal Wave Force and Wave Buoyance Acted on Circular-Sectioned Pier

Numerical Investigation of Wave Run-Up and Load on Heaving Cylinder Subjected to Regular Waves

Experimental study of dynamic pressure and wave load on variform vertical cylinders under extreme waves

Numerical Study on Wave Dissipation and Mooring Force of a Horizontal Multi-Cylinder Floating Breakwater

Numerical simulation of wave run-up on three cylinders in an equilateral-triangular arrangement

Water wave radiation by bottom-mounted surface-piercing concentric cylinders

An Improved Prediction for Wave Runup on a Circular Cylinder

CFD Study of Wave Interaction with Single and Two Tandem Circular Cylinders

Wave forces and wave run-up on a truncated rectangular column based on the hydrodynamic experiment

Unified Empirical Relations for Total Inline Wave Forces on Pile-Supported Structures in Regular and Irregular Waves

An experimental study on the inline wave force on a truncated vertical cylinder

Analytical Solution for the Linear Wave Diffraction by a Uniform Vertical Cylinder with an Arbitrary Smooth Cross-Section

Numerical Study of the Force Characteristics and Flow Field Patterns of a Cylinder in the Internal Solitary Wave

Shallow Water Breaking Wave Loads on Vertical Cylinders