Abstract:Multi-celled corrugated-plate concrete-filled steel tubular (MC-CFST) walls are innovative steel-concrete composite walls comprising horizontally arranged corrugated steel plates, interval flat steel plates, and infilled concrete. Due to the significantly improved out-of-plane stiffness, the corrugated steel plate provides a considerable confinement effect on the infilled concrete, which enhances the structural efficiency and cost-effectiveness of MC-CFST walls. In this study, the stability performance of MC-CFST walls under combined axial and in-plane bending loads was investigated through extensive numerical simulations. A refined finite element (FE) model was established and validated using existing test results. Moreover, a formula for calculating the bending capacity of MC-CFST walls was also derived and validated against FE results. Additionally, parametric analyses were conducted to evaluate the effects of various factors such as the wall width, wall height, concrete strength, steel strength, and width of individual corrugated cells on the global stability performance. It was found that the stability performance was predominantly affected by the overall width of the wall rather than the width of the individual corrugated cells, with an increase in wall dimensions generally diminishing the stability performance. Furthermore, increasing the concrete strength improved the stability performance, while increasing the steel strength had a negative effect. Finally, a design formula was proposed for evaluating the bearing capacity and stability performance of MC-CFST walls under combined axial and in-plane bending loads. The formula demonstrated good agreement with the FE results, and it could provide a valuable reference for practical designs of MC-CFST walls.

Stability Evaluation of a Quay Wall of Large Cylinders

Stability of a trial quay wall of large diameter cylinders

Force Mode and Reasonable Scale of Breakwater Structure with Bucket-Box Foundation

Lateral Bearing Performance of a Defective Pile-Supported Wharf with Batter Piles

Centrifugal Model Test and Numerical Analysis of Deformation and Stability of Seawall on Soft Clay

Numerical studies on the stability of caisson quay wall

Deformation and Stability of the Seawall, Considering the Strength Uncertainty of Cement Mixing Piles

Safety Evaluation of an Ancient Masonry Seawall Structure with Modified DDA Method

Stability Design of Multi-Celled Corrugated-Plate CFST Walls under Combined Axial and In-Plane Bending Loads

Stability of the Large Cylindrical Structures in Hong Kong–Zhuhai–Macao Bridge: A Case Study

Stability of jetties for channel protection in soft soils at Huanghua Port

Analysis of Stability Against Upheaval of Excavation by Upper Bound Method Considering the Retaining Wall

Stochastic Analysis and Simulation for Seawall Engineering on Qiantang Estuary

Stability Analysis During Floating and Sinking Construction of Super Water Intake Caisson in Open Sea

Seismic liquefaction and stability analysis of Qiantang River Embankment

Seismic Performance of a Block-Type Quay Wall with Liquefiable Backfill: Comparison Between Centrifuge Test, Design Code, and High-Fidelity Numerical Modeling

Seismic Performance of Block-Type Quay Walls with Liquefiable Calcareous Sand Backfill

Dynamic Numerical Simulation of A New Quay Wall Structure with Geosynthetics

Anti-Seismic Reliability Analysis of Quayside Container Crane

Shallow Water Breaking Wave Loads on Vertical Cylinders

Limit equilibrium solutions to anti-overturning bearing capacity of suction caissons in uniform and linearly increasing strength clays