Abstract:In this paper, we assumed that the soil layer back-silted on the surface of the river bottom was impermeable. The tidal load was treated as a large-area overload periodically applied on the silt soil layer. Taking into account the coupling loading of the water and soil, we built a model to calculate the circumferential strain of the immersed tunnel elements. By using MIDAS GTS NX finite element software, we calculated the circumferential strain in the tunnel wall direction under a tidal load. The circumferential strains of the tunnel elements in the Zhoushan immersed tunnel were continuously monitored using fiber Bragg grating sensors for 24 h. The circumferential strain increments at each monitoring position were calculated based on the change of the tide level. The results were compared with the measured increments of the circumferential strains. Based on these data, we summarized the variation pattern of the circumferential strain increments under a periodic tidal load. In addition, in this paper, we calculated the total circumferential strain distribution in the inner and outer walls in different cross-sections of the tunnel elements and identified positions that should be monitored with extra care. The results show that the calculated circumferential strain increments at each measuring position of the tunnel elements are in good agreement with the measured values. This demonstrates that the theoretical calculation model is reliable. In cross-sections of the same tunnel element, the time-dependence curves of the measured circumferential strain increments at the symmetrical measurement points are approximately consistent with each other. Tidal load-induced strain accounts for approximately 12–15% of the total strain. The correlation between circumferential strain over a cross-section and tidal level depends on the constraints on both sides of the cross-section, and stronger constraints result in weaker correlations. It is important to note that tensile strain is large along the inner wall of the middle portion of the top and bottom plates as well as along the outer wall of the sides of the bottom plate.

The Layered Integrating Method for Calculating Wave Force of Submerged Floating Tunnel Based on Morison Equation

Vibration of layered saturated ground with a tunnel subjected to an underground moving load

Fluid–Vehicle–Tunnel Coupled Vibration Analysis of a Submerged Floating Tunnel Based on a Wake Oscillator Model

Numerical Simulation of Dynamic Response of Submerged Floating Tunnel under Regular Wave Conditions

Global Responses Analysis of Submerged Floating Tunnel Considering Hydroelasticity Effects

Dynamic Response Analysis for Submerged Floating Tunnel Due to Fluid-Vehicle-tunnel Interaction

Coupled Vibration Analysis of Submerged Floating Tunnel System in Wave and Current

The study of hydrodynamic load on a submerged floating tunnel tube in an ideal fluid layer under the action of earthquake P-wave

Effects of Marine Sediment on the Response of a Submerged Floating Tunnel to P-wave Incidence

Study on Vibration Response of Submerged Floating Tunnel Considering Vehicle Eccentric Load

Dynamic response analysis of a submerged floating tunnel subjected to moving load

Analytical Wave Function Method for Modelling a Twin Tunnel Embedded in a Saturated Poroelastic Full-Space

Numerical investigation of dynamic responses and mooring forces of submerged floating tunnel driven by surface waves

Coupled dynamic analysis for wave action on a tension leg-type submerged floating tunnel in the frequency domain

Methods for Analyzing Seismic Response of Submerged Floating Tunnel and Research Development

Vehicle-SFT-current Coupling Vibration of Multi-Span Submerged Floating Tunnel, Part I: Mode Superposition and Galerkin Hybrid Method

The Wave Function Method for Calculation of Vibrations from a Twin Tunnel in a Multi-Layered Half-Space

Numerical Study of the Interaction Between an Internal Solitary Wave and a Submerged Extended Cylinder Using OpenFOAM

Spatial Dynamic Response of Submerged Floating Tunnel under Impact Load

A Theoretical Model for the Circumferential Strain of Immersed Tunnel Elements under Tidal Load

Spatial Analysis Of The Submerged Floating Tunnel In The Jintang Strait