Abstract:Jacket foundations for offshore wind turbines, typically having three or four latticework legs, are mainly subjected to lateral loads induced by winds, waves and currents during their service life. An accurate assessment of the bearing capacity of these foundations is of great importance in the design. This paper presents a study into the monotonic lateral loading behavior of tetrapod piled jacket foundations in undrained clay, with the complex lateral loads being simplified to an equivalent lateral load acting at a certain height of the jacket. A centrifuge testing programme was undertaken to provide high-quality validation data for the development of a three-dimensional finite element model established using ABAQUS. The key parameters investigated are the spacing and embedment of the piles, the height to which the equivalent lateral load acts and the angle between the direction of this load and the orthogonal line of the jacket in the horizontal plane. The parametric study aims to provide guidance to the optimal design of jacket piled foundations: for instance, to examine the critical pile embedment beyond which limited improvement of the bearing capacity of the foundation can be achieved and to define the most unfavorable lateral loading direction. In addition, the limitations of the commonly assumed constant p-multiplier, regardless of the lateral deflection of the pile and the depth along it, are critically discussed. Then an improved analytical model is proposed, based on the existing model used in design and the parametric study results, to quantify the variation of p-multiplier with depth and with pile deflection.

Study on Loads of Spuds-anchored Backhoe Dredger

Safe Jacking Height of Spud-Positioning Backhoe Dredger

Dynamic Response of Spuds in Large Grab Dredger Under Combined Loads

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Load Transfer of Offshore Open-Ended Pipe Piles Considering the Effect of Soil Plugging

Dynamic Stability Analysis of Backhoe Dredger Based on Time Domain Method

Calculation for Spud-lifting Force of Cutter Suction Dredger

Undrained Bearing Capacity of Spudcan under Combined Loading

Environment Load and Its Effects on Capability of Cutter Suction Dredger

INFLUENCE OF ANCHORAGE DEPTH ON MECHANICAL BEHAVIOUR OF DOUBLE-ROW ANTI-SLIDE PILES

Dynamic Load Analysis of the Super Cutter Suction Dredger Cutter based on Rock Cutting Theory

Load Analysis of Ultra-large Self-propelled Grab Dredger during Operation Process

Load Analysis and Parameter Optimization for Anchor Boom Based on Matlab/VB Mixed Programming

Analysis of Additive Load of Pipe Jacking Construction on Adjacent Pile

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

3D Design of Spud positioning System for Large Grab Dredger

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Analysis of Superimposed Load Induced by Propulsion of Adjacent Level Parallel Pipe-Jacking

Numerical Model for Suction Caisson under Axial Cyclic Loadings

Influences of Vehicle Loads on Braced Excavation in Soft Clay

Gantry mounting structure strength analysis on a cutter suction dredger