Abstract:The jack-up rig is the most widely applied mobile platform in the shallow-water offshore drilling. Since several predetermined target wells are in the soil stratum of sand overlying clay, the punch-through accidents occur frequently during the jack-up rig spudcan penetration leading to disastrous consequences and sometimes even casualties. Although a few centrifugal model experiments and indoor large-scale experiments have been conducted to simulate the spudcan penetration, these experiments expose significant knowledge gaps that deviate from the actual field operations due to the limitations of a constant displacement speed plan instead of multi-stage preloading plan. In this study, seventeen (17) field experiments simulating spudcan installation in sand overlying clay in in-situ soil strata in the intertidal sea of the Bohai Bay are reported to address the knowledge gaps. A systematic study of the spudcan penetration is presented through key influencing factors such as soil strength ratio of upper sand to lower clay, geometric ratio of spudcan diameter to upper sand thickness, ballasting speed and holding period time. Results indicate that the ultimate (peak) soil bearing capacity increases almost quadratically with the increase in strength ratio of upper sand to lower clay; the final spudcan penetration resistance decreases as a power law relationship with the increase in geometric ratio of spudcan diameter to upper sand thickness; the instantaneous spudcan penetration velocity increases as a logarithmic function with the increase in ballasting speed and the pore water pressure decreases as an exponential function with the increase in holding period time. From these experiments, three novel schemes are proposed to prevent the punch-through. Lastly, this study provides a design basis and theoretical guidance for precise calculations of the ultimate bearing capacity, accurate analysis of punch-through risk and effective prevention of the punch-through accidents in the real jack-up rig.

Safe Jacking Height of Spud-Positioning Backhoe Dredger

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

Study on Loads of Spuds-anchored Backhoe Dredger

Environmental Effects Caused by Construction of Rectangular Jacking Pipes with Large Section, Small Space and Shallow Overburden

Prediction of Surface Subsidence Caused by Rectangular Pipe Jacking Construction

Dynamic Stability Analysis of Backhoe Dredger Based on Time Domain Method

Dynamic Response of Spuds in Large Grab Dredger Under Combined Loads

Environment Load and Its Effects on Capability of Cutter Suction Dredger

Experimental study on the global behaviour of jack-up unit reinstalled near a footprint

Model Tests on Jacking Installation and Lateral Loading Performance of Jacket Foundation in Sand

Study on calculation methods of ground deformation induced by pipe jacking construction

Study on Calculating Methods of Soil Vertical Deformation Induced by Pipe Jacking Construction

New Approach for Environmental Load Charts of Jack-ups Considering Actual Preloading Operations

Numerical Assessment of Jackup Spudcan Foundations by varying Angle of Spud in 3d Fem in Geotechnical Engineering

Selection of jacking sequence and jacking parameter analysis of multi-row jacking pipes in water-rich sand

Analysis of Additive Load of Pipe Jacking Construction on Adjacent Pile

Influence of the Advance Jacked Pipe on the Jacking Force of the Subsequent Pipe Based on Pipe–Soil Full Contact Model

Simplified mechanical calculation model for an entire jack-up platform system

3D Design of Spud positioning System for Large Grab Dredger

Field experimental investigation of punch-through for different operational conditions during the jack-up rig spudcan penetration in sand overlying clay

Numerical investigation on reinstallation of jack-up unit with rectangular spudcan close to footprint