Abstract:Recently tetrapod piled jacket (TPJ) foundations are considered as a promising solution for offshore wind turbines in waters with depths ranging from 20 m to 50 m. This paper presents a numerical study into the monotonic lateral loading behaviour of TPJ foundations in medium sand, in terms of overall load-displacement responses of TPJ foundations and internal force within individual corner piles as well as pile-soil interaction. The results of previous centrifuge model tests are used to provide high-quality verification for the development of a 3D finite element model established by ABAQUS. A series of parametric studies is then carried out to look into more detailed response of TPJ foundations subjected to lateral loads, including the influence of spacing and slenderness ratio of piles, loading height as well as soil friction angle. The numerical results show that there are two various deformation models of TPJ foundations during lateral loading. One is shearing dominated deformation model under smaller loads, while another one is overturning dominated model under larger loads. Moreover, the lateral soil-pile interaction is found to be greatly influenced by enhancing/weakening effects of the axial forces of individual piles. The cause of this phenomenon is primarily due to the change in soil stress induced by pile vertical movement and radial deformation. To quantify this effect on pile-soil interaction of TPJ foundation, an enhancement factor Gamma(s), defined as the ratio of the soil resistance on downwind piles to that on upwind piles, is proposed. Consequently, the relationship between Gamma(s), depth of influence zone z(c )and four parameters are carefully investigated. For simplicity, the Gamma(s) is assumed constant and independent with pile lateral deflection as well as soil depths, based on which the values for Gamma(s) and z(c) are recommended for practical design uses. It is highlighted in the present study that these values should be chosen based on the specific loading conditions to provide much safer and more robust design for TPJ foundations.

Simplified mechanical calculation model for an entire jack-up platform system

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Analysis Approach of Piled Jacket Foundation in Sand for Offshore Wind Turbines Subjected to Lateral Loads

Numerical modelling on effect of loading rate on uplift behavior of suction caissons

Model Tests on Jacking Installation and Lateral Loading Performance of Jacket Foundation in Sand

Simulation of impact load on ship-platform collision

Simplified T -Z Models for Estimating the Frequency and Inclination of Jacket Supported Offshore Wind Turbines

Fatigue Reliability Analyses on Key Parts of Tension Leg Platform

Evaluation of damage to offshore platform structures due to collision of large barge

Numerical investigation on reinstallation of jack-up unit with rectangular spudcan close to footprint

System Reliability Analysis Method for Offshore Jacket Platforms under Extreme Loads

Prediction of most probable extreme values for jackup dynamic analysis

Numerical Investigation on the Lateral Loading Behaviour of Tetrapod Piled Jacket Foundations in Medium Dense Sand

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Enhanced Multi-Springs Model for Estimating Suction Caisson Responses under Cyclic Lateral Loading

Numerical Model for Suction Caisson under Axial Cyclic Loadings

Mechanical analysis of eight-legged temporary support structure under wave forces

Numerical evaluation of the coupled/uncoupled effects of lower marine riser package and/or blowout preventer with a lower flex joint in a hang-off drilling riser

Numerical Assessment of Jackup Spudcan Foundations by varying Angle of Spud in 3d Fem in Geotechnical Engineering

Experimental study on the global behaviour of jack-up unit reinstalled near a footprint