Abstract:The multi-terminal hybrid LCC/MMC HVDC has been applied to overcome the simultaneous commutation failure problem caused by the multi-infeed LCC-HVDCs in the East China. The high-speed and selectivity line protection method is required for the multi-terminal hybrid HVDC system. In this paper, the reflection and refraction of the fault traveling waves at different kinds of line terminals are characterized by transfer functions. Then the fault voltage as well as its first peak time at different line terminals when different internal and external faults occur are derived respectively. The conclusion proves that the first peak time of line-mode fault component voltage (FPTV) for internal faults is smaller than that for external faults, which is independent of fault impedance and fault type as well. Therefore, a FPTV-based non-unit ultra-high-speed dc line protection method is proposed. The algorithm is implemented in the developed protection prototype and validated in the Kun-Liu-Long three-terminal hybrid HVDC RTDS test system. The test results show that the proposed method can fast and correctly identify line faults in the multi-terminal hybrid HVDC system, even with 500 Ω fault impedance. Comparing with the traveling wave protection method of ABB, the proposed method improves the sensitivity when high-impedance faults occur.

Research on Extra-High-voltage Line Protection Based on RTDS

RTDS Environment Development of Ultra-High-Voltage Power System and Relay Protection Test

Research on HV Line Protection Relay Based on Characteristic of Main Transient Frequencies

The special problems of 750 kV transmission line and its influences on relay protection

Simulation Research of Surge Protection Device for 10 Kv Distribution Networks

Survey of Relay Protection Technology for HVDC Transmission Lines

Technical Development of Non-unit Protection Devices Based on Transient Signals for HVDC Transmission Lines

Systematic Study of Ultra-High-speed Transient Based Protection for EHV/UHV Transmission Line

Traveling Wave Fault Location and Protection Tester for DC Lines

Design of a Real Time Digital Simulation System for Test of New Protection Schemes

Present Status and Prospect of Research and Development of Transient Component Based Ultra- High-Speed Protection for EHV/UHV Transmission Lines

Research on Unloaded Switching into Fault Protection for UHV Transmission Line

A Development Platform of Transient Based Protection for EHV Transmission Lines

Research on Transient-Based Protection for HVDC Lines

Study on the influence of electromagnetic coupling of UHVDC power transmission lines on the voltage derivative protection

Non-Unit Ultra-High-Speed Line Protection for Multi-Terminal Hybrid LCC/MMC HVDC System and Its Application Research

Improved differential protection scheme for long distance UHVDC transmission line

Single-Ended Transient-based Protection for EHV Transmission Lines Basic Theory

Distribution Line Automation System Based on Non-Communication Protection in the Case of Symmetrical Fault

RELAY PROTECTION FOR UHV TRANSMISSION LINES Part Two Disposition of Relay Protection

Research of Undervoltage Sensing Protection at Tuanlin Converter Station