Abstract:TiO2/Al2O3 composite membranes with photocatalytic capability have been successfully prepared from colloidal titania sols by the sol–gel technique. Pore sizes of the resulting membrane were mainly controlled by the sol properties and the immersion time. A preliminary investigation of the sol–gel process, the membrane characterization and the stability of composite membrane were carried out using IR-spectra, scanning electron microscopy (SEM), X-ray diffraction (XRD). The results proved that TiO2 immobilized on the support of Al2O3 had anatase crystal structure in the calcination temperature range. Direct Black168 was used as the test pollutant for investigation of the multifunctions of photocatalysis and separation of TiO2/Al2O3 composite membrane. Some operational parameters such as the pressure in the membrane cell, the initial pH and air flow were determined and the influence of various parameters was also discussed to obtain high reaction rates, high membrane rejection and operating stability. The removal of Direct Black168 with UV irradiation alone achieved 70% and the retention of the dye with membrane filtration alone reached 65% after 300min in the continuous system. By combining the photocatalysis with membrane techniques, the removal efficiency of the dye was improved markedly and reached 82% after 300min. Although the dye was not completely decomposed by photocatalysis, the degradation of the dye helped to enhance the composite membrane flux and prevent membrane fouling. It was possible to treat successfully Direct Black168 solutions (100mg/L) by means of a continuous process obtaining good values of permeate fluxes (82L/m2h). The TiO2/Al2O3 composite membrane with photocatalytic function could be interesting for water purification.

TiO2 Inorganic/organic Composite Membranes and Their Filtration, Separation and Antifouling Properties

Antifouling behaviours of PVDF/nano-TiO2 composite membranes revealed by surface energetics and quartz crystal microbalance monitoring

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Sol–gel Preparation of PAA-g-PVDF/TiO2 Nanocomposite Hollow Fiber Membranes with Extremely High Water Flux and Improved Antifouling Property

Preparation of Nano-TiO2-Modified PVDF Membranes with Enhanced Antifouling Behaviors via Phase Inversion: Implications of Nanoparticle Dispersion Status in Casting Solutions

Preparation of Nano-TiO 2 -Modified PVDF Membranes with Enhanced Antifouling Behaviors via Phase Inversion: Implications of Nanoparticle Dispersion Status in Casting Solutions.

Preparation and characterization of poly (vinylidene fluoride)/TiO 2 hybrid membranes

Organic-inorganic composite ultrafiltration membrane with anti-fouling and catalytic properties by in-situ co-casting for water treatment

Novel High-Flux Polyamide/tio2 Composite Nanofiltration Membranes on Ceramic Hollow Fibre Substrates

Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

Preparation and Characterization of PSF/TiO_2 Organo-Mineral Composite Ultrafiltration Membrane

PVDF–TiO2 Composite Hollow Fiber Ultrafiltration Membranes Prepared by TiO2 Sol–gel Method and Blending Method

Effects of TiO_2 Nanoparticles on the Performance of PVDF Ultrafiltration Membrane

Fabrication of Photocatalytic Membrane and Evaluation Its Efficiency in Removal of Organic Pollutants from Water

Superamphiphilic and underwater superoleophobic membrane for oil/water emulsion separation and organic dye degradation

A chitosan/dopamine-TiO2 composite nanofiltration membrane for antifouling in water purification

Fabrication of TiO2/Al2O3 Composite Membrane with Photocatalytic Capability and Its Performance in Dye Removal

Influence of Dispersed TiO2 Nanoparticles Via Steric Interaction on the Antifouling Performance of PVDF/TiO2 Composite Membranes

Fabrication And Characterization Of Silica/Titania Nanotubes Composite Membrane With Photocatalytic Capability

CNTs–TiO2/Al2O3 Composite Membrane with a Photocatalytic Function: Fabrication and Energetic Performance in Water Treatment

Fabrication of TiO2/MWNTs/Al2O3 composite membrane and its performance in water treatment