Abstract:In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s -1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry.The results haveconfirmed the strong three-dimensionalityof the turbulent flow inthe roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can,together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves. The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the `roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.

Determination of Wall Friction Velocity of the Turbulent Boundary Layer by Two-Parameter Nonlinear Curve Fitting

On the Accurate Measurement Method of Standing Cross-flow for Three-dimensional Laminar Airfoil Boundary Layer

Accurate Method for Estimating Wall-Friction Based on Analytical Wall-Law Model

SKIN FRICTION MEASUREMENT IN TURBULENT BOUNDARY LAYER BY MEAN VELOCITY PROFILE METHOD

Exploring Feasibility of a Small-scale Wind Tunnel with Rectangular Section Suitable for Experiments on Wall Turbulent Flow

On the Measurement of Wall-Normal Velocity Derivative in a Turbulent Boundary Layer

Extracting Accurately and Efficiently Burst Events of Wall Turbulence

Measurement of A Wall-Bounded Turbulent Mixing Layer Flow

High Sensitive Flexible Hot-Film Sensor for Measurement of Unsteady Boundary Layer Flow

Skin-friction from temperature and velocity data around a wall-mounted cube

Research on Computational Method of Wall Interference and Correction in Wind Tunnel Experiment

Experimental Investigation on Velocity and Temperature Field in a Rotating Non-isothermal Turbulent Boundary Layer Using Hot-wire

Assessment of uncertainties in hot-wire anemometry and oil-film interferometry measurements for wall-bounded turbulent flows

EXPERIMENTAL INVESTIGATION ON BOUNDARY LAYER FLOW UNDER THE EFFECT OF TEMPERATURE GRADIENT IN A SMOOTH ROTATING CHANNEL USING HOT-WIRE

On the Measurement of Lateral Velocity Derivatives in Turbulent Flows

Experimental Study of Measurement for Dissipation Rate Scaling Exponent in Heated Wall Turbulence

Continuous Wavelet Transform of Turbulent Boundary Layer Flow

Accurately predicting turbulent heat transfer over rough walls: a review of measurement equipment and methods

Experimental research of scaling law in wall turbulence

Measurements of fluctuating lift forces on rectangular cylinders in turbulent flow

Near Wall Flow over Urban-like Roughness